-
Junior Member
registered user
needed to configure network printer.....
hallu all....
i need help on configuring/setting up printer. i am using a network printer and am now trying out using knoppix version 3.4. the kde printer wizard guided me along and when it came to a particular page, im stuck....
it asked for printer address--->is it the ip address of the printer or juz the name of the printer ?
it also asked for the port....again ?
there are a few options but i don really understand wat it wants.
i really need the printer configured....
if anyone could kindly help me, ur help is greatly appreciated...
thnx,
~ira~
-
Senior Member
registered user
In conjunction with the question for the port, I would bet it is the ip-adress.
For the correct port-number, I don't know.
If your printermanual hasn't a hint, or the manufactors web-page, you could try to use nmap, to scan the printer for open ports:
with printer_ip being 192.168.99.11 or whatever.
-
Senior Member
registered user
Hai again ira
I did some checking on printer server. The ip is actually the ip of the print server ( that small box) that connect from your hub/switch/router.... to your printer. If the box doesn't exist than it's not called printer server. So do the port, belongs to that box. Try googling on type of your print server and find the manual somewhere. Perhaps under your boss table.
-
Junior Member
registered user
hai user unknown & shah,
thnx for da reply ya....
will try it todae....
will let u nice guyz noe da results ya....
p.s: shah....im not allowed to go under ma boss' table....FORBIDDEN!
thnx again,
~ira~
-
Junior Member
registered user
-
Senior Member
registered user
-
Senior Member
registered user
631 is the port used by cups, the common unix printing system, to use.
So I woulnd't forget about that, but insert into the browser:
Code:
http:// 192.168.x.x:631/
That's at least the startingpoint for configuring the cups-printing system.
BTW: this singlish is very hard to understand for me. Could you try to use a language, where I find at least a dictionairy for?
-
Junior Member
registered user
ellu,
errm....
sorry ya....
i forgot to ask....
do i need to configure the network first?
psst user unknown,
im sorry if you dont really understand what im writing....
im just used to write that way in msn
terima kasih(thank you in malay)
~ira~
-
Senior Member
registered user
Kein Problem, ira, MSN erklärt natürlich so einiges...
You try to use a network printer, without having the network configured?
-
Junior Member
registered user
Similar Threads
-
By shantanuo in forum Networking
Replies: 0
Last Post: 09-20-2005, 05:52 AM
-
By brianfay in forum Hdd Install / Debian / Apt
Replies: 0
Last Post: 04-04-2005, 01:42 AM
-
By ebidder in forum MS Windows & New to Linux
Replies: 2
Last Post: 02-05-2005, 12:42 AM
-
By ptesone in forum Hardware & Booting
Replies: 0
Last Post: 03-16-2004, 08:25 PM
-
By urpk in forum General Support
Replies: 0
Last Post: 02-11-2004, 02:34 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
A-Tech 8GB DDR3 1600 PC3-12800 Laptop SODIMM 204-Pin Memory RAM PC3L DDR3L 1x 8G
$13.99
HyperX FURY DDR3 8GB 16GB 32GB 1600 MHz PC3-12800 Desktop RAM Memory DIMM 240pin
$12.90
A-Tech 8GB PC3-12800 Desktop DDR3 1600 MHz Non ECC 240-Pin DIMM Memory RAM 1x 8G
$13.99
HyperX FURY RAM DDR4 16GB 8GB 32GB 4GB 3200 2666 2400 2133 Desktop Memory DIMM
$9.64
Lot of 2 32GB DDR4 2666 PC4-21300 SODIMM RAM Modules Mixed Brand
$60.00
Samsung 128GB (4x 32GB) M86B4G70DM0-CMA3 PC3-14900L 4Rx4 DDR3 ECC Reg Server Mem
$39.99
Samsung 16GB 2Rx4 PC4-2400 RDIMM DDR4-19200 ECC REG Registered Server Memory RAM
$20.99
8GB PC3L-12800S 1600MHz SODIMM DDR3 RAM | Grade A
$12.00
A-Tech 256GB 4x 64GB 4Rx4 PC4-19200 ECC Load Reduced LRDIMM Server Memory RAM
$287.96
A-Tech 128GB 2x 64GB 4Rx4 PC4-19200 ECC Load Reduced LRDIMM Server Memory RAM
$143.98