-
Senior Member
registered user
Youooohoooo..
I have to diasagree with User unknown. You can configure your print server without configuring your network. Your boss is right and always do
The way this printer server is configured, similar to configuring a router, infact it is a router cum print server. You only need to configure your network card before configuring it.
You can set your network later.
-
Junior Member
registered user
yodelahihoo....
okie shah....
i tried your way just now....
went to http://192.168.0.100 ==>my boss changed it....
when using windows web browser, i can see the system server information....
when using knoppix web browser, "an error occurred while loading http://192.168.0.100/status.htm.
could not connect to host 192.168.0.100."
argh!!!!
but before that, since i had the server information already i went ahead with the set up wizard....
it comes to a page(the same page im stuck at) where it asked for printer information....
i did a network scan (network : 192.168.0.0-255) and it shows ip address 192.168.0.3....
so i thought maybe that is the printer's ip address and so i just click on next,next,next....
when it comes to a test print, our printer did not even receive any data....
so its totally frustrating when i cant click on finish....
thnx(im gonna be bald!!),
~ira (-.-)~
-
Senior Member
registered user
Okay
Lets do step by step....
This procedure is for knoppix
1) Before run any web browsing to configure print server (which you did in windows) you need to set your network card. Run network card configuration. Assign IP address : 192.168.0.X (*x = don't use 100, already reserved to print server) Make sure it doesn't conflict with other pc.
netmask :255.255.255.0
2) Setup your printer using wizard and the ip is : 192.168.0.100 (what your boss set) and port : 631.
Don't scan, just click <next>. If success it will list all the printer driver. Select your printer type and model. Follow the instruction till end.
-
Junior Member
registered user
so sorry....
how do you configure the network card?
it will come out the black screen right?
~ira~
-
Senior Member
registered user
Caranya:
1) Click Penguin icon di bawah---> Network-->Networkcard configuration. Don't use dhcp.
-
Junior Member
registered user
hehe....
pandai-pandai guna bahasa melayu....
terima kasih....
bear with me please....
thnx....
~ira~
-
Junior Member
registered user
elo....
did those things you said....
ip address : 192.168.0.3
netmask : 255.255.255.0
default gateway : 192.168.0.1
that done....
did the wizard....
keyed in the ip : 192.168.0.100
error msg appeared....
"no printer found at this address/port!"
sedih saya....
~ira~
-
Senior Member
registered user
netcardconfig okay
cuba scan dengan same IP: 192.168.0.100 dan port :631
Kalau tak boleh, cuba tukar gateway too : 192.168.0.100
-
Senior Member
registered user
Forgot to ask, Is your port number really 631?
Please check using webrowser again. http://192.168.0.100
-
Junior Member
registered user
hiey....
still cant work....
did those things you said(again)....
ip address : 192.168.0.3
netmask : 255.255.255.0
default gateway : 192.168.0.100
broadcast address : 192.168.0.255
nameserver : IS-D2D363
that done(again)....
guess what shah?
i cant login to the internet pula after i configure the network card....
adeh....sakit hati saya (angry not evil)
,
~ira~
Similar Threads
-
By shantanuo in forum Networking
Replies: 0
Last Post: 09-20-2005, 05:52 AM
-
By brianfay in forum Hdd Install / Debian / Apt
Replies: 0
Last Post: 04-04-2005, 01:42 AM
-
By ebidder in forum MS Windows & New to Linux
Replies: 2
Last Post: 02-05-2005, 12:42 AM
-
By ptesone in forum Hardware & Booting
Replies: 0
Last Post: 03-16-2004, 08:25 PM
-
By urpk in forum General Support
Replies: 0
Last Post: 02-11-2004, 02:34 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$273.00
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
HP HPE Microserver Gen 7 8 9 iLO 2/3/4/5Advanced License Lifetime Key| FAST SHIP
$10.00
SuperMicro CSE-836 16LFF Server X9SCL+-F Xeon E3-1220V2 3.10GHz CPU 8GB RAM
$169.99
HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server - 1 x Intel Xeon
$846.48
HP ProLiant MicroServer Gen8 G2020T 2GB RAM 4-BAY One 1 TB HDD PID: 712318-001
$200.00
Supermicro CSE-825-7 X10DRW-i 2 Xeon E5-2667v4 3.2GHz SAS3 2U One Power Supply
$209.75
X10SLH-N6-ST031 SUPERMICRO SYSTEMBOARD MOTHERBOARD LGA 1150 MICRO ATX FIREWALL
$60.00
Supermicro 1U X11DPU 2x Xeon Gold 6132 2.6GHz / 128gb / 10x 2.5 Trays / 2x 750w
$649.99
1U BareMetal pfsense opnsense Router Firewall DNS Server 6x 10GB Ethernet Ports
$149.00