-
Junior Member
registered user
needed to configure network printer.....
hallu all....
i need help on configuring/setting up printer. i am using a network printer and am now trying out using knoppix version 3.4. the kde printer wizard guided me along and when it came to a particular page, im stuck....
it asked for printer address--->is it the ip address of the printer or juz the name of the printer ?
it also asked for the port....again ?
there are a few options but i don really understand wat it wants.
i really need the printer configured....
if anyone could kindly help me, ur help is greatly appreciated...
thnx,
~ira~
-
Senior Member
registered user
In conjunction with the question for the port, I would bet it is the ip-adress.
For the correct port-number, I don't know.
If your printermanual hasn't a hint, or the manufactors web-page, you could try to use nmap, to scan the printer for open ports:
with printer_ip being 192.168.99.11 or whatever.
-
Senior Member
registered user
Hai again ira
I did some checking on printer server. The ip is actually the ip of the print server ( that small box) that connect from your hub/switch/router.... to your printer. If the box doesn't exist than it's not called printer server. So do the port, belongs to that box. Try googling on type of your print server and find the manual somewhere. Perhaps under your boss table.
-
Junior Member
registered user
hai user unknown & shah,
thnx for da reply ya....
will try it todae....
will let u nice guyz noe da results ya....
p.s: shah....im not allowed to go under ma boss' table....FORBIDDEN!
thnx again,
~ira~
-
Junior Member
registered user
-
Senior Member
registered user
-
Senior Member
registered user
631 is the port used by cups, the common unix printing system, to use.
So I woulnd't forget about that, but insert into the browser:
Code:
http:// 192.168.x.x:631/
That's at least the startingpoint for configuring the cups-printing system.
BTW: this singlish is very hard to understand for me. Could you try to use a language, where I find at least a dictionairy for?
-
Junior Member
registered user
ellu,
errm....
sorry ya....
i forgot to ask....
do i need to configure the network first?
psst user unknown,
im sorry if you dont really understand what im writing....
im just used to write that way in msn
terima kasih(thank you in malay)
~ira~
-
Senior Member
registered user
Kein Problem, ira, MSN erklärt natürlich so einiges...
You try to use a network printer, without having the network configured?
-
Junior Member
registered user
Similar Threads
-
By shantanuo in forum Networking
Replies: 0
Last Post: 09-20-2005, 05:52 AM
-
By brianfay in forum Hdd Install / Debian / Apt
Replies: 0
Last Post: 04-04-2005, 01:42 AM
-
By ebidder in forum MS Windows & New to Linux
Replies: 2
Last Post: 02-05-2005, 12:42 AM
-
By ptesone in forum Hardware & Booting
Replies: 0
Last Post: 03-16-2004, 08:25 PM
-
By urpk in forum General Support
Replies: 0
Last Post: 02-11-2004, 02:34 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
1U IBM x3550 M5 4 Bay SFF SAS3 Server 2x E5-2683 V3 28 Core 128GB DDR4 2x Tray
$318.00
IBM Power S822 8284-22A 12SFF Power8 3.89GHz 6Core 64GB RAM No HDD Server System
$359.99
IBM Server System X3100 M4 | Xeon @ 3.10 Ghz | 8GB | 250GB HDD No OS (IG-PC26)
$101.66
IBM Power S822 12-Bay Server System Power8 Core 3.42Ghz DVD-Rom Drive 64GB No HD
$399.99
ibm server z series
$16000.00
IBM AC1 7870 BladeCenter Blade Server 2*Xeon X5570 2.93GHz 12GB SEE NOTES
$11.13
IBM SYSTEM x3200 M2 Server - HDD wiped, No OS
$75.00
IBM Power8 S822L 20-Core 3.42GHz 256Gb 1.2Tb 40G Elastic Storage Server 5148-22L
$599.95
IBM Lenovo X3650 M5 2U 8x 2.5ā€¯ CTO Rack Server ā€“ 2x HS, 2x 750W
$199.00
IBM Power S822 8284-22A 12SFF Power8 3.89GHz 6-Core 64GB RAM No Bezel/HDD Server
$319.99