I have the same problem. Is there any solution around? What can i config by hand? Is there any error log somewhere? I didn't find anything...
Raphael
i'm testing knoppix 3.6 on a econel 30 server & have a problem with the isdn-config tool: (avm fritz pci card is installed)
the "start" button is not available after i configured my isp settings, i can't connect
when i try exactly the same way in knoppix 3.4, it's no problem to connect to the internet via isdn/avm fritz card; on the same machine.
are there known problems with isdn/avm fritz cards in knoppix 3.6 ?
thanks for any ideas!
zip.it
I have the same problem. Is there any solution around? What can i config by hand? Is there any error log somewhere? I didn't find anything...
Raphael
same Problem for me too
wihle trying to configure with isdn-config there where not entries in /var/log/messages
I then tried to start isdn as root "/etc/init.d/isdn start", after that I tried to dial with "isdnctrl dial ippp0".
In /var/log/messages you can see that there is an attempt to dial but it ends up with
"fcpcipnp0,ch0 cause E001B"
in "man isdn_cause" this meens error location from user (I think my PC) and cause "Destination out of order"
Any hints ???
Thanx,
Achim
Hello,
to make things clearer what happens on my side:
I have 2 PCI Cards sharing the same IRQ11 (my Video-Card and the FritzCard ISDN-Controller) and I have suse 6.3, suse 7.2 and suse 9.2 installed on my system. Using the suse-distributions I have no problem to connect to my provider.
At the moment I think the problem with debian/knoppix is in the "handling" of pci or interrupts but I don't know the modules responsible for that.
There is one last thing I could try: change the physical slot of the ISDN FritzCard, but because the system ddoes well with suse I don't want to to that.
@zip.it and raphaelmack:
try to install with the debian "isdnconfig", this is only text-based but it seems that the right config-files will be written with this tool.
A-Tech 8GB DDR3 1600 PC3-12800 Laptop SODIMM 204-Pin Memory RAM PC3L DDR3L 1x 8G
$13.99
HyperX FURY RAM DDR4 16GB 8GB 32GB 4GB 3200 2666 2400 2133 Desktop Memory DIMM
$9.64
A-Tech 8GB PC3-12800 Desktop DDR3 1600 MHz Non ECC 240-Pin DIMM Memory RAM 1x 8G
$13.99
CRUCIAL DDR3L 8GB 16GB 32GB 1600 MHz PC3-12800 Laptop Memory RAM SODIMM 204-Pin
$14.35
Team T-FORCE VULCAN Z 16GB (2 x 8GB) 288-Pin PC RAM DDR4 3200 (PC4 25600) Intel
$35.99
A-Tech 16GB 2 x 8GB PC3-12800 Laptop SODIMM DDR3 1600 Memory RAM PC3L 16G DDR3L
$27.98
HMT84GL7AMR4C-RD 32GB DDR3 Server Memory RAM 14900L ECC REG 4Rx4 SK Hynix Cisco
$13.99
A-Tech 16GB 2x 8GB PC3-12800 Desktop DDR3 1600 MHz 240pin DIMM Memory RAM 16G 8G
$27.98
Hynix 64GB 4Rx4 PC4-2133P-L LRDIMM DDR4-17000 ECC Load Reduced Server Memory RAM
$64.99
A-Tech 32GB 2x 16GB PC4-25600 Laptop SODIMM DDR4 3200 MHz Non-ECC Memory RAM 32G
$59.99