Hi !
just installed knoppix 3.5 from linuxtag-DVD over an existing knoppix 3.4-installation on /dev/hdb2.
Before this installation of 3.5 I already had a data-partition /dev/hdb4 made during the installation of 3.4 with the directories "data" and "install", now with the following attributes:
drwxrws--- 4 root 1003 4096 2004-05-03 22:01 data
drwxrws--- 5 root 1003 4096 2004-03-24 23:35 install
any try to open one of the dirs with the root-shell will fail in the error-message "no access rights" (transtaled from german, may be another msg like this in english).
Tried to "chown root data": no error msg
Tried to "chgrp root data": operation not allowed
Tried to "chmod 770 data": operation not allowed
How can I get back the rights for these directories ?
Do I have to format the partition again ?
Is there a way to access this dirs from two different knoppix-systems (e.g. test and prod) ?
knulle
IBM LSI SAS9220-8i M1015 46M0861 SAS/SATA PCI-e RAID Controller Both brackets
$139.00
LSI 9305-16i SATA SAS 12Gbs RAID Controller PCIe 3.0 x8 IT-Mode 4* 8643 SATA
$229.99
XDHXT DELL PERC H710P 6Gbps 1GB PCI RAID CONTROLLER 0XDHXT
$59.00
HPE 869102-001 Smart Array E208i-a SR Gen10 Storage Controller RAID SP: 871039
$129.99
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$35.96
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$86.99
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
Yottamaster 5 Bay RAID Hard Drive Enclosure USB3.1 Type C 2.5"/3.5" SATA HDD SSD
$142.49
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99