-
Junior Member
registered user
Sorry, I prested submit to many times. (Darn wirless connection so slow!)
-
Junior Member
registered user
Well, it's a strange problem. Might be a hardware problem - maybe there is a new bios for the drive. But here is the last thing I would try. Usually I would do this with a rescue disc. I think these commands are on the knoppix 3.6 live cd. You might have to change the numbers in the second mkpart command to fit your disk geometry.
bash# parted /dev/hda
(parted) rm 1
(parted) mkpart primary linux-swap 0.0 256.0
(parted) mkpart primary ext2 256.0 6800
(parted) print
(parted) quit
bash# mkext2fs -j /dev/hda2
-
Junior Member
registered user
-
Junior Member
registered user
Well, without any more information regarding error messages or dmesg output or /proc/kmsg, etc, I can't help you.
Is your target computer connected to the internet? One of the nice things about Knoppix is you should be able to boot it and connect to the internet off CD. So you should be able to make all these posts from your target computer. That would be nice, because you could just cut and paste the error messages, /var/log/messages, and so on.
Anyway, sorry it didn't work for you. Maybe next time.
-
Senior Member
registered user
I would suggest you run testdisk first to check your partition. It may wrongly written.
-
Junior Member
registered user
I created a Swap Parition (whith the correct filesystem) Now when I get to the installer their more options when it starts to install it says:
Error: Formatting of failed. Some messages from
mkfs.ext3: Usage: mkfs.ext3 [-c|-t|-l filename] [-b
block-size] [-fragment-size]
[-i bytes-per-inode] [-j] [-J journal-options] [-N
number-of-inodes]
-----------------------------------------------------------45%----
< OK >
Similar Threads
-
By cyberstew in forum Hdd Install / Debian / Apt
Replies: 8
Last Post: 11-26-2004, 12:50 AM
-
By javiergp in forum General Support
Replies: 0
Last Post: 04-20-2004, 11:25 AM
-
By KnopperX in forum General Support
Replies: 5
Last Post: 02-27-2004, 04:48 PM
-
By knoppixnewb in forum General Support
Replies: 1
Last Post: 10-09-2003, 11:16 AM
-
By Rython in forum Hdd Install / Debian / Apt
Replies: 1
Last Post: 08-15-2003, 07:44 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Supermicro 815-6 4-Bay Server
$60.00
Supermicro X10SRW-F Server
$169.99
Genuine HP ProLiant MicroServer Gen8 Intel Pentium G2020T 2.5GHz 712318-001
$199.95
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
Open Eye OE-MTX08 8TB Micro Server With Linux (Boots To Login) No Accessories
$294.95
Supermicro E300-8D Xeon D-1518 2.20GHz Mini Server
$549.99
Supermicro Super Server Tower Xeon X7 32GB ram. UIO slot- NO HDD NO OS
$124.95
Supermicro 5018A-FTN4 Rack Server - Black
$125.00
1U 20" Short Depth Server Firewall PFSense X11SSH-F Xeon 3.5Ghz 32GB RAM NVME
$247.00
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$297.00