-
Junior Member
registered user
Sorry, I prested submit to many times. (Darn wirless connection so slow!)
-
Junior Member
registered user
Well, it's a strange problem. Might be a hardware problem - maybe there is a new bios for the drive. But here is the last thing I would try. Usually I would do this with a rescue disc. I think these commands are on the knoppix 3.6 live cd. You might have to change the numbers in the second mkpart command to fit your disk geometry.
bash# parted /dev/hda
(parted) rm 1
(parted) mkpart primary linux-swap 0.0 256.0
(parted) mkpart primary ext2 256.0 6800
(parted) print
(parted) quit
bash# mkext2fs -j /dev/hda2
-
Junior Member
registered user
-
Junior Member
registered user
Well, without any more information regarding error messages or dmesg output or /proc/kmsg, etc, I can't help you.
Is your target computer connected to the internet? One of the nice things about Knoppix is you should be able to boot it and connect to the internet off CD. So you should be able to make all these posts from your target computer. That would be nice, because you could just cut and paste the error messages, /var/log/messages, and so on.
Anyway, sorry it didn't work for you. Maybe next time.
-
Senior Member
registered user
I would suggest you run testdisk first to check your partition. It may wrongly written.
-
Junior Member
registered user
I created a Swap Parition (whith the correct filesystem) Now when I get to the installer their more options when it starts to install it says:
Error: Formatting of failed. Some messages from
mkfs.ext3: Usage: mkfs.ext3 [-c|-t|-l filename] [-b
block-size] [-fragment-size]
[-i bytes-per-inode] [-j] [-J journal-options] [-N
number-of-inodes]
-----------------------------------------------------------45%----
< OK >
Similar Threads
-
By cyberstew in forum Hdd Install / Debian / Apt
Replies: 8
Last Post: 11-26-2004, 12:50 AM
-
By javiergp in forum General Support
Replies: 0
Last Post: 04-20-2004, 11:25 AM
-
By KnopperX in forum General Support
Replies: 5
Last Post: 02-27-2004, 04:48 PM
-
By knoppixnewb in forum General Support
Replies: 1
Last Post: 10-09-2003, 11:16 AM
-
By Rython in forum Hdd Install / Debian / Apt
Replies: 1
Last Post: 08-15-2003, 07:44 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Cisco SG300-52-Port Gigabit Managed Rack Mountable Network Switch
$44.95
ARUBA J9772A 2530-48G PoE+ 48 PORT ETHERNET SWITCH W/ RACK EARS J9772-60301
$140.23
Fortinet FortiSwitch FS-124D-POE 24 Port Gigabit Ethernet Switch UNREGISTERED
$99.97
HPE ARUBA 2530-24G J9773A PoE+ 24-PORT GIGABIT ETHERNET SWITCH J9773-60201
$93.24
Netgear ProSafe FS726T 24 Port 10/100 Smart Switch w/2 Gigabit Ports
$19.99
NETGEAR GS108 ProSafe 8-Port GbE Unmanaged Switch w/ Power Adapter
$14.99
TP-Link TL-SG108 8-Port 10/100/1000 Mbps Gigabit Ethernet Desktop Switch FREE SH
$14.99
Cisco WS-C2960G-48TC-L V03 Catalyst 2960G 48-Port Gigabit Ethernet Switch
$41.99
HP 2530-48G PoE+ 48 Port PoE Gigabit Ethernet Network Switch J9772A
$99.98
Loocam Gigabit PoE Switch 8 Port 96W 2 Uplink Port Unmanaged Ethernet Switch
$49.99