-
I need SERIOUS help, please give me any information you can
Alright, I have had this problem for going on two days now, and I've been doing various solutions I have found over the internet, but nothing is working!
My problem is this:
I receive a stop: 0x024 error (corrupt NTFS.sys file) when booting up my machine with my drive that I use for storage connected to the computer. If I disconnect the drive, my computer boots up fine. So I reason out that the problematic drive is, of course, my second drive.
I'm sure all of the solutions I have tried WOULD work, but there is one problem!
THE DRIVE IS NEVER VISIBLE/DETECTABLE!
I have ran Knoppix from a boot cd and viewed the detectable drives, and I only get my main drive. BUT, I can feel and hear the HDD spinning, so I'm fairly sure that the drive isn't broken or anything.
One obstacle with my situation might be the fact that the drive is connected on an expansion IDE card, and the card has a BIOS of its own that runs AFTER the computer BIOS displays, so is there any chance that this could be conflicting with my recovery of the data and/or drive?
So, does anyone know of ANY way to recover my drive? It's not my main drive so there is no Windows information on it, and my BIOS won't recognize it but it still spins normal so I don't think the drive is broken.
I am running Windows XP Home edition, Pentium 4.
-
Senior Member
registered user
A expansion IDE card might be holding it back.
-- similar situation -- ignore if you aren't interested. --
On a new install of linux to a server with a IDE expansion card, I made the mistake of custom compiling a kernel driver for the IDE card as a loadable module driver. This lead to a catch 22 situation where the kernel does not have the driver to read from the HD but the HD is where the driver is located. I rebooted with knoppix, mounted the HD, correctly recompiled the kernel and it booted fine.
-- situation over--
You could try to identify the expansion card by either physically looking at it and see if you can determine the make & model or you can try lspci -v from a root console in knoppix. Then you can google that IDE card against the linux kernel to see if driver for linux exists and see if it available on the Knoppix CD in /lib/modules/2.4.27/kernel/drivers/ide/ . If the driver is available on the Knoppix CD, then at a root console you should be able to
modprobe someIDEmodulename
and it should give you /dev/hde or hdf.
If the module is not available then you could try another bootable linux CD. The linux distribution Gentoo has a small CD download that has a differently compiled kernel and may have that module on it. You should download the file 79MB file /releases/x86/2004.2/livecd/install-x86-minimal-2004.2.iso from onw of Gentoo's mirrors at http://gentoo.mirrors.pair.com/relea...mal-2004.2.iso. If you do download & use the Gentoo minimal CD please note that you will be presented witha command line and be expected to perform all administrative tasks from the console.
I hope this helps.
James
-
Senior Member
registered user
Switch your harddisk with onboard ide (off course you need to open your pc).
Similar Threads
-
By estudiante in forum General Support
Replies: 1
Last Post: 08-31-2004, 11:29 PM
-
By twin_cylinder in forum General Support
Replies: 0
Last Post: 05-08-2004, 05:12 PM
-
By Cuddles in forum General Support
Replies: 4
Last Post: 12-22-2003, 04:40 PM
-
By paradocs in forum The Lounge
Replies: 11
Last Post: 08-05-2003, 03:45 PM
-
By zeus916 in forum Hardware & Booting
Replies: 4
Last Post: 02-26-2003, 04:14 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
New Cisco GLC-TE 1G SFP Copper RJ45 100m 1000BASE-T Transceiver Module
$22.32
NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping*
$18.00
LOT OF 10 455883-B21 HP 10Gb SR SFP Transceiver 455885-001 456096-001
$59.99
New HP HPE Aruba J4858D 1G SFP LC SX 850nm 500m MMF XCVR Transceiver Module
$28.49
GENUINE Cisco SFP-10G-SR V03 SFP+ GBIC Transceiver Module 10-2415-03
$6.80
🔥🔥🔥SFP-10G-SR V03 Original CISCO 10-2415-03 850nm 10GB SFP+ Multi Module🔥🔥
$6.80
HP 10Gb SR SFP+ 10GBASE-SR 455885-001 10Gigabit Ethernet Transceiver 456096-001
$6.99
Cisco GLC-LH-SMD Transceiver Module SFP 10-2625-01
$14.25
New Sealed Cisco SFP-10G-LR 10GBASE-LR SFP Plug-in Transceiver Module
$15.00
Dell X1018 X-Series Smart Managed Switches 16-Port Gigabit 2-Port SFP Switch
$42.00