-
Can't Get Internet to Work--3.6 Live CD
Warning: Complete Linux newbie here!
I am trying to use Knoppix 3.6 live CD. I found the equivalent of the Internet Connection Wizard (KPPP), set it up, then tried to connect. The dialog box got stuck on Initializing Modem... When I go to Configure > Modem tab > Query Modem button. It recognizes the modem (I think it says Modem is Ready), then goes through whatever process it's doing, then shows a screen with labels like ATI1, ATI2, etc. and all the boxes are blank.
Then when I hit the Terminal button (on the same box as the Query Modem button), it says Modem is Ready.
Did I set something up incorrectly? Without any changes, the modem and internet connection works fine in Windows. If you need more info, I can provide it! Thanks in advance for any help and thanks for this great resource for us newbies!
-
Senior Member
registered user
Originally Posted by
dylan000
all the boxes are blank.
That means it didn't "find" your modem (what kind do you have?). Try going to the "Device" tab and clicking on the box next to "Modem Device" and cycling through them (/dev/ttyS0, /dev/ttyS1, etc.), then going back and trying "Query Modem" on the "Modem" tab after each change.
When you've got the right device selected, those empty boxes will be filled up with the output from where it queryed your modem.
-
Thanks for your easy-to-follow response! My internal laptop modem is listed as ESS ES56CVM-PI Data Fax Voice Modem. I tried what you said, and when I ran the Query Modem on /dev/ttyS0, it was the only one where I got a Modem Ready, then it ran through it's process, but I got blank AT strings. On any other setting (/dev/ttyS1, /dev/ttyS2, etc.), I either got Modem is Busy or Unable to Open Modem.
Any other instructions you can offer?
-
I should point out that I went through the Knoppix Help menu that detailed what to check/fill in on each tab of the setup boxes. Also, if it helps, I have discovered that in Windows, the modem is listed as being on COM3.
-
Senior Member
registered user
I spent some time googling, and as best I can tell, you have an Agere (formerly Lucent) based Winmodem (link to Windows drivers which you probably don't need).
No, I don't know how to tell you get it working from the Knoppix Live CD. I doubt you can.
You could try Kanotix instead, it's a good Knoppix based distro, and apparently has the modules for that modem, plus a script to install them, on the Kanotix Live CD.
I say "apparently," since I don't have one to test.
See this thread on the Kanotix forum.
-
Thanks for the info! I'll check it out! I was warned that Knoppix might not recognize my modem, so thank you for clarifying that that's probably the issue, and not my setup. Maybe I'll try to find an external modem. Thanks again!
-
Senior Member
registered user
Kanotix doesn't have a script to install them, upon further inspection, but does have modules named "ltmodem" and "ltserial" that might work.
Sorry I couldn't help you to get it working!
Similar Threads
-
By nlyric in forum General Support
Replies: 0
Last Post: 08-26-2005, 05:57 AM
-
By Maistro in forum General Support
Replies: 1
Last Post: 03-23-2005, 11:03 PM
-
By azucar151 in forum Networking
Replies: 1
Last Post: 12-04-2004, 11:46 AM
-
By Ric_Zero in forum General Support
Replies: 6
Last Post: 10-01-2004, 05:12 AM
-
By bonecrusher in forum General Support
Replies: 1
Last Post: 03-05-2004, 11:17 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Dell Poweredge R640 Server | 2x Silver 4114 20 Cores | 192GB | 8x HDD Trays
$1939.99
Dell PowerEdge R720XD Xeon E5-2680 V2 2.8GHz 20 Cores 256GB RAM 12x4TB
$510.00
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$79.19
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
Dell PowerEdge R730, 2 sinks, SystemBoard, 8 trays,H330,Idrac 8 exp, 2x750w Psu
$135.00
Dell Poweredge R730xd 2.5in 2x E5-2690 v3 2.6ghz 24-Cores 64gb H730 2x 750w
$189.99
DELL POWEREDGE R730 8 Bay SFF 2x 8 CORE E5-2667v4 3.2GHz 32GB RAM H730 iDrac8ENT
$264.95
DELL PowerEdge R730 Server 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$284.00
DELL PowerEdge R630 8SFF Server 2x E5-2680v3 2.5GHz =24 Cores 128GB H730 4xRJ45
$360.00