-
Can't Get Internet to Work--3.6 Live CD
Warning: Complete Linux newbie here!
I am trying to use Knoppix 3.6 live CD. I found the equivalent of the Internet Connection Wizard (KPPP), set it up, then tried to connect. The dialog box got stuck on Initializing Modem... When I go to Configure > Modem tab > Query Modem button. It recognizes the modem (I think it says Modem is Ready), then goes through whatever process it's doing, then shows a screen with labels like ATI1, ATI2, etc. and all the boxes are blank.
Then when I hit the Terminal button (on the same box as the Query Modem button), it says Modem is Ready.
Did I set something up incorrectly? Without any changes, the modem and internet connection works fine in Windows. If you need more info, I can provide it! Thanks in advance for any help and thanks for this great resource for us newbies!
-
Senior Member
registered user
Originally Posted by
dylan000
all the boxes are blank.
That means it didn't "find" your modem (what kind do you have?). Try going to the "Device" tab and clicking on the box next to "Modem Device" and cycling through them (/dev/ttyS0, /dev/ttyS1, etc.), then going back and trying "Query Modem" on the "Modem" tab after each change.
When you've got the right device selected, those empty boxes will be filled up with the output from where it queryed your modem.
-
Thanks for your easy-to-follow response! My internal laptop modem is listed as ESS ES56CVM-PI Data Fax Voice Modem. I tried what you said, and when I ran the Query Modem on /dev/ttyS0, it was the only one where I got a Modem Ready, then it ran through it's process, but I got blank AT strings. On any other setting (/dev/ttyS1, /dev/ttyS2, etc.), I either got Modem is Busy or Unable to Open Modem.
Any other instructions you can offer?
-
I should point out that I went through the Knoppix Help menu that detailed what to check/fill in on each tab of the setup boxes. Also, if it helps, I have discovered that in Windows, the modem is listed as being on COM3.
-
Senior Member
registered user
I spent some time googling, and as best I can tell, you have an Agere (formerly Lucent) based Winmodem (link to Windows drivers which you probably don't need).
No, I don't know how to tell you get it working from the Knoppix Live CD. I doubt you can.
You could try Kanotix instead, it's a good Knoppix based distro, and apparently has the modules for that modem, plus a script to install them, on the Kanotix Live CD.
I say "apparently," since I don't have one to test.
See this thread on the Kanotix forum.
-
Thanks for the info! I'll check it out! I was warned that Knoppix might not recognize my modem, so thank you for clarifying that that's probably the issue, and not my setup. Maybe I'll try to find an external modem. Thanks again!
-
Senior Member
registered user
Kanotix doesn't have a script to install them, upon further inspection, but does have modules named "ltmodem" and "ltserial" that might work.
Sorry I couldn't help you to get it working!
Similar Threads
-
By nlyric in forum General Support
Replies: 0
Last Post: 08-26-2005, 05:57 AM
-
By Maistro in forum General Support
Replies: 1
Last Post: 03-23-2005, 11:03 PM
-
By azucar151 in forum Networking
Replies: 1
Last Post: 12-04-2004, 11:46 AM
-
By Ric_Zero in forum General Support
Replies: 6
Last Post: 10-01-2004, 05:12 AM
-
By bonecrusher in forum General Support
Replies: 1
Last Post: 03-05-2004, 11:17 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Dell Memory SNPF875VC/8G A9845651 8GB 1Rx8 DDR4 SODIMM 2666MHz RAM
$53.95
Team T-FORCE VULCAN Z 16GB (2 x 8GB) 288-Pin PC RAM DDR4 3200 (PC4 25600) Intel
$35.99
A-Tech 8GB DDR3 1600 PC3-12800 Laptop SODIMM 204-Pin Memory RAM PC3L DDR3L 1x 8G
$13.99
HyperX FURY RAM DDR4 16GB 8GB 32GB 4GB 3200 2666 2400 2133 Desktop Memory DIMM
$15.85
A-Tech 8GB PC3-12800 Desktop DDR3 1600 MHz Non ECC 240-Pin DIMM Memory RAM 1x 8G
$13.99
A-Tech 16GB 2 x 8GB PC3-12800 Laptop SODIMM DDR3 1600 Memory RAM PC3L 16G DDR3L
$27.98
Kingston HyperX FURY DDR3 8GB 16GB 32G 1600 1866 1333 Desktop Memory RAM DIMM
$21.95
G.SKILL Trident Z RGB 16GB 2x 8GB 3200MHz DDR4 Desktop RAM F4-3200C16S-8GTZR
$38.99
Crucial 16GB (2x 8GB) Kit DDR3 1600MHz PC3-12800 UDIMM Desktop 240-Pin CL11 RAM
$21.95
Corsair Vengeance 32GB 16GB 8GB DDR3 1600MHz 1866MHz 2133MHz 2400MHz Memory LOT
$79.99