From a console enter "aumix" That should bring up another mixer. You can then make your settings. Then save the settings.
After that you can enter "aumix -L" to reset the mixer settings.
Hi all,
i have a laptop with an ATI-Soundcard. Knoppix 3.6 detecteds that the driver "snd-atiixp" is to use. So far, so good. But it doesn't work in KDE. Kmix doesn't find a mixer. In Knoppix 3.4 the soundcard works very good.
Is anyone there, who can help me?
Thanks in Advance....
CKLM
P.S. Sorry for my englisch
P.P.S. If you a german and you have a Medion MD41700-Laptop, please send me an PM! Thanks!
From a console enter "aumix" That should bring up another mixer. You can then make your settings. Then save the settings.
After that you can enter "aumix -L" to reset the mixer settings.
when i start aumix ist writes, that it cannot open the mixer.
Have you an idea?
CKLM
My experience is limited to my own effort to get an onboard sound chip to work. I have to use the modprobe command to force it to load the driver for my sound chip, something like "modprobe snd-es18xx..." The command also requires inputting the correct IRQ and port addresses for the sound chip. I found that just using the cheatcode ALSA=es18xx didn't work. Even though it showed loading the driver during boot the sound wasn't working. I also got a "cannot open" error when I tried to start aumix. After the modprobe command aumix would work. Kmix wouldn't show a mixer until after aumix set it up. Since I use 3.4 I don't know what might be different for you in 3.6.
You might use the search function here to look for your sound card, computer name, driver name, etc. It took me a while to read everything but I eventually found just what I needed.
Good luck.
JUNIPER MPC5E-40G10G MPC5E CARD 6x40GE & 24x10GE, COUIBD1BAF
$3999.99
Juniper MX-MPC2-3D-A Router Card + MIC-3D-4XGE-XFP-A & MIC-3D-20GE-SFP
$799.99
Juniper Networks EX3300-48P 48-Port PoE+ 4x SFP+ Network Switch w/ Power Cord
$43.95
JUNIPER EX3400-48P 48x 1GB PoE+ RJ-45 4x 10GB SFP+ 2x 40GB QSFP+, DUAL AC POWER
$210.00
Juniper EX3300-48P, 48 Port PoE+ Gigabit Network Switch w/ Power cord
$54.99
Juniper Networks EX3400-48P 48x Gigabit PoE+ RJ45 2x 40Gb/s QSFP+ Switch
$166.24
Juniper MX204 +JUNOS X2 AC Dual Power Supply JN204/MX204 4x40GbE Or 4x100GB
$6999.99
Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch
$41.28
Juniper QFX5100-48T-AFI 48 100M/1G/10G Base-T 6 QSFP AFI
$485.00
Juniper EX2300-48P PoE+ Switch 48x 1GbE & 4 SFP+/SFP 10G uplinks, Tested
$289.00