From a console enter "aumix" That should bring up another mixer. You can then make your settings. Then save the settings.
After that you can enter "aumix -L" to reset the mixer settings.
Hi all,
i have a laptop with an ATI-Soundcard. Knoppix 3.6 detecteds that the driver "snd-atiixp" is to use. So far, so good. But it doesn't work in KDE. Kmix doesn't find a mixer. In Knoppix 3.4 the soundcard works very good.
Is anyone there, who can help me?
Thanks in Advance....
CKLM
P.S. Sorry for my englisch
P.P.S. If you a german and you have a Medion MD41700-Laptop, please send me an PM! Thanks!
From a console enter "aumix" That should bring up another mixer. You can then make your settings. Then save the settings.
After that you can enter "aumix -L" to reset the mixer settings.
when i start aumix ist writes, that it cannot open the mixer.
Have you an idea?
CKLM
My experience is limited to my own effort to get an onboard sound chip to work. I have to use the modprobe command to force it to load the driver for my sound chip, something like "modprobe snd-es18xx..." The command also requires inputting the correct IRQ and port addresses for the sound chip. I found that just using the cheatcode ALSA=es18xx didn't work. Even though it showed loading the driver during boot the sound wasn't working. I also got a "cannot open" error when I tried to start aumix. After the modprobe command aumix would work. Kmix wouldn't show a mixer until after aumix set it up. Since I use 3.4 I don't know what might be different for you in 3.6.
You might use the search function here to look for your sound card, computer name, driver name, etc. It took me a while to read everything but I eventually found just what I needed.
Good luck.
Cisco Meraki MA-SFP-1GB-SX 1000BASE-SX SFP Transceiver Module
$24.99
Cisco GLC-FE-100LX 100BASE-LX SFP Transceiver Module
$15.59
Cisco GLC-FE-100LX-RGD 100BASE-LX SFP Transceiver Module
$17.99
Cisco w/ Green Hologram SFP-25G-SR-S 25G SFP28 SR 850nm 100m LC MMF
$68.99
Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03
$8.00
SFP-10G-SR Original Cisco 10GBASE-SR SFP+ V02 Multi mode Transceiver 10-2415-02
$5.00
Brand New Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Module 1310nm 10km SMF LC
$13.89
Lot of 10 - HP 10Gb SR SFP+ Transceiver 455883-B21 455885-001 456096-001 850nm
$23.99
Juniper Networks EX3300-48P 48-Port PoE+ 4x SFP+ Network Switch w/ Power Cord
$43.95
LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module
$89.00