-
Senior Member
registered user
Avaya (Orinoco) Wireless Card
Hi
Finally got round to trying Knoppix this afternoon - very impressed. However cannot seem to configure my wifi card which is an Avaya Silver PC Card (rebadged Wavelan/Lucent/Orinoco card).
The card is recognised, the correct modules are being loaded etc but then I'm stuck. I'm unabl;e to configure the card with either the "Wavelan Configuration" tool ('no card found') or using iwconfig ("incompatibile versions of wireless extensions packages"). Any hints as to what I should try next?
Chris
###results of cardctl and iwconfig###
knoppix@ttyp0[knoppix]$ cardctl ident
Socket 0:
no product info available
Socket 1:
product info: "Avaya Communication", "Avaya Wireless PC Card", "Version 01.01" , ""
manfid: 0x0156, 0x0002
function: 6 (network)
knoppix@ttyp0[knoppix]$ iwconfig
lo no wireless extensions.
Warning: Driver for device eth0 has been compiled with version 14
of Wireless Extension, while this program is using version 15.
Some things may be broken...
eth0 IEEE 802.11-DS ESSID:"" Nickname:"HERMES I"
Mode:Managed Frequency:2.457GHz Access Point: 00:00:00:00:00:00
Bit Rate:11Mb/s Tx-Power=15 dBm Sensitivity:1/3
Retry limit:4 RTS thr:off Fragment thr:off
Power Management:off
###results of lsmod###
knoppix@ttyp0[knoppix]$ lsmod
Module Size Used by Not tainted
ext3 62944 0 (autoclean)
jbd 45524 0 (autoclean) [ext3]
sbp2 16288 0 (unused)
autofs4 8724 1 (autoclean)
agpgart 34752 0 (unused)
soundcore 3396 0 (autoclean)
serial 51908 0 (autoclean)
usb-uhci 21868 0 (unused)
usbcore 57120 1 [usb-uhci]
af_packet 13480 0 (autoclean)
orinoco_cs 4552 0
ohci1394 15688 0 (unused)
orinoco 31384 0 [orinoco_cs]
ieee1394 29516 0 [sbp2 ohci1394]
hermes 5220 0 [orinoco_cs orinoco]
ds 6472 2 [orinoco_cs]
yenta_socket 8704 2
pcmcia_core 37632 0 [orinoco_cs ds yenta_socket]
apm 9644 1
rtc 6940 0 (autoclean)
cloop 5552 1
-
Senior Member
registered user
I had a similar problem with my Orinoco silver too. Struggling for a while and finally solved after I enter the correct ESSID and encryption(WEP) key.
My experience is that the ESSID must match the one one the router, either though the manual hint that empty("") means any which should work. I may write to the author to clarify this.
The WEP key is also tricky as it needs to enter in the form of "sxxxx", the xxxxx is the 40 digit one, as one used in windows.
Hope this help.
-
Senior Member
registered user
Thanks for the reply. The problem is that according to cardctl, the card is present. According to iwconfig, the card is not :(
Really don't know where to go from here...
-
Senior Member
registered user
But your iwconfig indicate an entry 'eth0' which seems to point to the correct entry ?
can you try 'iwconfig eth0 essid "your setup" enc "sxxxx" and see if it works ?
-
Senior Member
registered user
Sorted :)
Actually got this working last week, was just about to post when I had to go away quickly. Anyway, got it working, here's how:
1. Ran 'Network Card Config' or whatever it's called - from Knoppix menu - cannot remember exact name, currently under Windows :( Pretty obvious really - as well as configuring the wireless side of the card, you have to configure the standard IP parameters. Bit embarassed about forgetting that ;)
2. At the end of the 'Network Card Config' wizard/dialog sequence, the 'Wavelan Config' thingie automatically starts (although you can also access it from the KDE/Knoppix menu). Only one minor problem though - for some reason the (WEP) encryption key is not taken. In fact the only way to input it is as root - so I simply opened a root console and typed
Code:
iwconfig eth0 essid "my setup" enc "s:xxxxx"
Thanks garyng for the encouragement, and sorry for not posting earlier (been a manic week). Anyway, besides the root issue for the WEP key, I'm impressed with the networking and wireless config tools - far superior to what I encountered a few months ago with Mandrake 9.0.
Cheers
Chris
-
Senior Member
registered user
OK now got this sorted as well. As I input my WEP key in ascii (and perhaps because it's only 40 bit), I needed to type and not just in the configurator as I was doing...
Hope this may help someone.[/code]
-
Hi, I'm trying KNOPPIX for the first time and I'm having a similar issue.
I tried everything in this thread and its still a no go.
I'm using an Orinoco Gold card with an Orinioco Ap-200.
WEP is enabled on the AP. But when I run the network config and type in the WEP key I get no activity.
My AP name is in the default format 41hh89 (not the real numbers) and my WEP key is alphanumeric 13 characters.
Any ideas on what I can do?
-
Senior Member
registered user
Did you ever manage to solve this?
-
I still havent been able to get mine to work.
at one point one of the lights of my orinoco was on, but i'm long from there, and i dont know how to get this thing working.
big noob to linux
help..
please
-
SOny Notebook with D-LINK Wireless card
I have a SOny Nookbook wiht D-LINK wireless card and having trouble as well. DO I have to enable WEP as today I do ont have it on in the server??? I know I should and have been lazy to do so. Please advice if anyone has been able to access the internet using wireless.
Thanks
Alex
Similar Threads
-
By jdamron in forum Networking
Replies: 0
Last Post: 10-01-2004, 05:32 PM
-
By fluppel in forum Networking
Replies: 12
Last Post: 05-08-2004, 06:43 PM
-
By ezfreeze in forum Networking
Replies: 7
Last Post: 09-10-2003, 01:48 AM
-
By fluze in forum Networking
Replies: 0
Last Post: 09-05-2003, 01:25 AM
-
By M. van der Ent in forum Hardware & Booting
Replies: 1
Last Post: 01-29-2003, 11:58 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
IBM Power S822 12-Bay Server System Power8 Core 3.42Ghz DVD-Rom Drive 64GB No HD
$399.99
Custom Server 1U IBM x3550 M5 4 Bay SFF SAS3 2x E5-2683 V3 28 Core 128GB DDR4
$315.00
IBM SYSTEM x3200 M2 Server - HDD wiped, No OS
$75.00
IBM 7944AC1 System x3550 M3 Server 1*Intel Xeon X5650 2.67GHz 4GB SEE NOTES
$26.97
IBM AC1 7870 BladeCenter Blade Server 2*Xeon X5570 2.93GHz 12GB SEE NOTES
$11.13
IBM System X3650 Server M2 2 x Xeon X5570 2.93 Ghz w/128 GB/DVDRW
$169.99
IBM System x3250 M4 Server Intel Xeon E3-1220 3.10GHz 8GB RAM No HDDs
$74.77
IBM Power 740 8205-E6C Express 8-SFF Power7 3.55GHz CPU 64GB RAM *No HDD* Server
$191.99
IBM SYSTEM x3650 M4 Xeon E5-2609 2.40GHZ 16GB DDR3-1066MHZ 2x 550W PSU TESTED
$109.95
IBM Power S822 8284-22A 2.5" 12-Bay 64GB 2X 00ND478 2X 00E2865 *READ*
$599.99