I haven't used lilo in ages. Try adding vga=0 and see if it boots then.
Hello list
I've got a fairly old Knoppix 3.3 HD-Install with 2.4.22.xfs Kernel but kept the system up-to-date with Debian unstable.
Now I'm trying to set up the Debian binary Kernel 2.6.8-1 out of apt. Every time I start the system with the 2.6.8-1 Kernel, after the kernel was loaded (the screen with lots of dots), the screen gets blank and stays blank until I restart the PC. The system isn't loading at all (HD stays inactive). I've got no other information, what could have gone wrong.
Does anyone know, what I missed?
Cheers and thanks in advance
- Ylz
Attached: Section of lilo.conf
Code:# booting with deb kernel 2.6.8-1 image=/boot/vmlinuz-2.6.8-1-686 label=Lx.2-6-8-1 initrd=/boot/initrd.img-2.6.8-1-686 read-only
I haven't used lilo in ages. Try adding vga=0 and see if it boots then.
mzilikazi is right. The problem is binary kernels from debian come with frame buffer disabled. So you need to remove "vga=791" from your "append" line in lilo. Or use Kano's kernel, works flawlessly for me, and supports FB...
It does the same for me.
Has someone been able to run knoppix with a kernel get by ?
Code:apt-get install kernel-image-2.6.8-1-686
I did manage to use a debian kernel image with Knoppix 3.3 but as baldyeti said, it's easier with Kanos kernel. AFAIK Kanotix kernels don't work with Knoppix 3.4 though.
I messed around with kernel images last winter and IIRC I had to do something like:
cd /boot
mkinitrd -o linux-2.6.8.gz
And change the kernel line in lilo.conf to point to initrd=/boot/linux-2.6.8.gz
Hello:
At last I was able to boot into my 2.6.8-1-686 kernel, but I want to know if it is possible to enable framebuffer in this new kernel I have downloaded and installed.
Is it possible?
Thanks
Don't know if it's possible to enable something that's disabled in the kernel.
OTOH, if it's this much work to get a kernel image running you might as well compile one and have a smaller kernel as well.
Seagate ST8000NM0055 8TB 7200RPM 256MB SATA 6.0 Gb/s 3.5" Enterprise Hard Drive
$34.33
HITACHI HUS724040ALA640 4TB 7200RPM 64MB SATA 6.0Gb/s 3.5" HARD DRIVE ZERO HOURS
$52.00
Western Digital 4TB Internal 7.2KRPM 3.5" (WD4000FYYZ) SATA Hard Drive ZERO HOUR
$69.99
Seagate ST1000VM002 1TB 64MB SATA6Gb/s 3.5" (Low Power) Hard Drive -PC, CCTV DVR
$24.99
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$79.99
WD Ultrastar DC HC530 14TB SATA 6G 3.5" 7200RPM Enterprise HDD - WUH721414ALE604
$110.00
Seagate ST12000NM0127 12TB 256MB 7200RPM 3.5" SATA 6.0Gb/s Enterprise Hard Drive
$93.99
CISCO A03-D1TBSATA 1TB 7.2K 6G 2.5INCH SATA HDD
$9.00
Western Digital DC HC320 Ultrastar 8TB 7200RPM SATA HD, HUS728T8TALE6L4, 0B36404
$99.00
Seagate ST8000NM0055 8TB 7200RPM 256MB SATA 6.0 Gb/s 3.5" Enterprise Hard Drive
$41.63