An external modem should be easier to comfigure especially for knoppix from cd. I've used USR/3Com and Zoom external modems. Most current pci hardware modems run on a nonstandard serial port.
rock
I understand that linux requires a hardware controled modem.
I also have already found several lists of modems that work. But they just list as yes/no.
Since I am going to have to buy a new modem I would realy like some personal biased oppinions on what the best dial-up modem is. What have you used with success, what brands would you avoid? Is there any real advantage to using an external over a harware controlled PCI modem?
THanks.
An external modem should be easier to comfigure especially for knoppix from cd. I've used USR/3Com and Zoom external modems. Most current pci hardware modems run on a nonstandard serial port.
rock
If you are out in the rural part of the country & using dial up, I suggest getting on old external MultiTech modem. My internal Win 56k modem never connects above 38,400. It is a 56k modem. The MultiTech I'm using is a MT2834ZDXb which has 33k connect capabilities. It is an external modem & is on the 1st serial port (/dev/ttys0) Remember real computer people start counting with 0! I suppose an external 56k modem would be faster. Remember most of the older modems have a 25pin female connector, so you will probably need a 25 pin male to 9 pin female cable.
Hobby_1
if anybody is following this, I decided on a Creative labs modemblatser external 56k v.92 serial modem. not because of any special features, but jut because BestBuy had onein an open box at a decent discount. It works great. i used kPPP and was online in a matter of minutes. Thanks for the help. i'm realy glad i decided to go external.
I'm brand new to Knoppix, just tried it last night.
Do I understand that using my internal device will not work? No moden was auto detected.
tnx
redcat
tip 01
Avoid USB external dial-up modems. - especially Olitec - no drivers available!
I use an older COM1 36kB olitec with kppp = ttyso under linux
Works just fine.
tip 02 avoid Internal PCI or Plug-in or WinModems - they are NOT supported and will NOT work.
That's just not true. Internal PCI controller-based modems should work--they'll just appear as ordinary serial ports. While it's possible to make some controllerless or soft modems work, you're much better off using a "real" modem if that's an option. As I've stated elsewhere in the forums, controller-based internal -or- external serial (not USB) modems are your best choice for desktop machines. For laptops with built-in modems, the effort required to obtain proprietary drivers may be justifiable.Originally Posted by ozfrog
Cisco Meraki MA-SFP-1GB-SX 1000BASE-SX SFP Transceiver Module
$24.99
Cisco GLC-FE-100FX-RGD 100BASE-FX SFP Transceiver Module
$17.99
Cisco GLC-GE-100FX 100BASE-FX SGMII SFP Transceiver Module
$83.99
Cisco SFP-10/25G-CSR-S 10/25GBASE-CSR SFP28, 850nm, 100m, LC,
$54.00
Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03
$8.00
SFP-10G-SR Original Cisco 10GBASE-SR SFP+ V02 Multi mode Transceiver 10-2415-02
$5.00
Brand New Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Module 1310nm 10km SMF LC
$13.89
NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping*
$18.00
LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module
$89.00
Juniper Networks EX3300-48P 48-Port PoE+ 4x SFP+ Network Switch w/ Power Cord
$43.95