Wow that's alot of burn.
Try boot with cheatcodes at prompt:
knoppix26 xmodule=radeon fb1024x768
![]()
I downloaded knoppix 3.6 today and successfully burned it to 4 cds. My only problem is that my main computer blacks out when the GUI starts up for a second time during boot(the last loading screen). Is this common? I've tested the CD on my other computer and it works fine. I have a pentium 3(600mhz) processor, and a radeon 9000(64mb Model). I've read the FAQ but I couldn't find anything about this in there. Got any ideas?
Wow that's alot of burn.
Try boot with cheatcodes at prompt:
knoppix26 xmodule=radeon fb1024x768
![]()
Dell EMC 092GD6 Broadcom 9305-16i LSI Quad Port 4 Port SAS RAID Controller
$84.99
OWC Guardian Maximus Raid Enclosure SATA Hard Drive FireWire
$36.99
Dell PERC H330 PCIe 3.0 x8 RAID Storage Controller 4Y5H1 High Profile
$15.99
Yottamaster 2 Bay RAID Hard Drive Enclosure USB 3.1 For 2.5" SATA HDD SSD UASP
$56.25
Inspur LSI YZCA-00424-101 Raid Card 12Gbps HBA Controller Low Profile 9300-8i IT
$15.98
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
LSI 8 Port 6Gbps PCIe 3.0 External SAS RAID Card w/ 1GB CacheVault & Low Profile
$26.10
9207-8i PCIE3.0 6Gbps HBA LSI FW:P20 IT Mode ZFS FreeNAS unRAID 2* SFF-8087 US
$32.88
Yottamaster 2 Bay RAID Hard Drive Enclosure USB 3.1 Type B For 3.5" SATA HDDs
$69.91
Yottamaster 5 Bay RAID Hard Drive Enclosure Type-C B For 2.5" 3.5" SATA HDD SSDs
$131.59