Yes they do. I had to set a password for root. Then the install went through. I don't know why but that's how I got around seeing those messages.
I just did a fresh install on my laptop as seen below, and although I don't see any obvious troubles yet, I figured I'd paste the warnings sent to the console during the installation process.
Does any of this look familiar to anyone?
-Rob
knoppix@ttyp0[knoppix]$ sudo knoppix-installer
Can't remove /usr/share/applications/./Ethereal.desktop: Read-only
file system, skipping file.
Can't remove /usr/share/applications/./EtherealAsRoot.desktop:
Read-only file system, skipping file.
Can't remove /usr/share/applications/./qtparted.desktop: Read-only
file system, skipping file.
Can't remove /usr/share/applnk/./Settings/Peripherals/kxconfig.desktop:
Read-only file system, skipping file.
/dev/mapper/control: open failed: No such device
Is device-mapper driver missing from kernel?
/dev/mapper/control: open failed: No such device
Is device-mapper driver missing from kernel?
Incompatible libdevmapper 1.00.19-ioctl (2004-07-03)(compat) and kernel driver
Warning: '/proc/partitions' does not match '/dev' directory structure.
Name change: '/dev/cloop0' -> '/dev/cloop'
Warning: Unable to determine video adapter in use in the present system.
Yes they do. I had to set a password for root. Then the install went through. I don't know why but that's how I got around seeing those messages.
Yes, I get the same warnings and 3.6 fails to boot for me (installing lilo in partition). All previous versions of Knoppix have installed fine. Did your 3.6 install actually boot ok? Did you do a MBR or partition install? There are a few mentions of this in the bugs list, see http://www.knoppix.net/docs/index.ph...3.6-2004-08-16Originally Posted by FatherBob
I tried about 5 times then it finally went through. Did testcd cheatcode before it finally worked. Everything booted fine for me and it all works great. Did an mbr install.
Yes, it boots. In fact, I used it to make my initial post, as well as this one.Originally Posted by markb
I've yet to determine if everything's working properly. My only experiment so far has been an attempt to compile a simple 'hello world' C++ source file (with no success and some puzzlement).
Oh, and I did MBR install.
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
Supermicro 4U 36 Bay Storage Server 2.4Ghz 8-C 128GB 1x1280W Rails TrueNAS ZFS
$712.98
DELL PowerEdge R730XD 24x 2.5" Server Dual 750W Dual Heatsink - BareBones TESTED
$269.99
Supermicro 4U 4x Nvidia GPU AI Server 2.1Ghz 16-Core 192GB 2x10G SFP+ 2x2200W
$1250.00
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$89.99
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
HP Proliant DL360 Gen9 28 Core SFF Server 2X E5-2680 V4 16GB RAM P440ar No HDD
$196.95
HP ProLiant DL360 G9 2x Xeon E5-2690 V3 24 Cores 2.6GHz P440ar 32GB DDR4
$119.99
DELL PowerEdge R730 Server 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$284.00
PowerEdge R710 Rackmount Server 80GB RAM 2x XEON E5520 CPU 4.75TB
$200.00