1) You need to set your networkcard first
run network card configuration (you'll find it on knoppix icon at the bottom)
2) You need to set your connection pppoe?
run adsl/pppoe configuration (you'll find it on knoppix icon at the bottom)
![]()
![]()
![]()
![]()
![]()
![]()
![]()
i have an built in ethernet port on the notebook. it's broadcomm 4400+ i think... anyway, when i boot knoppix 3.6 from the cd, it detected the network but my adsl modem's ethernet light is not lighted. so i can't log on to my isp.
sorry i'm a newbie to linux and knoppix. would appreciate it if u can help me
1) You need to set your networkcard first
run network card configuration (you'll find it on knoppix icon at the bottom)
2) You need to set your connection pppoe?
run adsl/pppoe configuration (you'll find it on knoppix icon at the bottom)
![]()
![]()
![]()
![]()
![]()
![]()
![]()
ok... i pressed yes to everything in the dialog box and when they say connect to the internet now then i pressed yes. so i launched the browser and guess what? it's not working...![]()
where is the location of the pppoe dialer? thanks.
1) Netcard configuration
When asked to use dhcp, selct no.
Enter i.p address of your pc ex: 192.168.0.2 or 192.168.1.2
DNS= enter dns address (IP) given to you by your isp (**this is important, some isp won't let you surf without it)
Gateway = you can leave this blank
Others=netmask=network=broadcast=just accept what is given to you.
2) ADSL/PPPOE configuration
It will try detect your modem.
Enter your username and password
It will ask you to connect upon boot, it's your decision.
To manually connect or disconnect your dsl, run this command as SU:
To connect : pon dsl-provider
To disconnect: poff -a
If you want a nice gui for dsl connection, try kdsl. Get it from:
http://www.kde-apps.org/content/show.php?content=10202
** In 3.4, sometimes knoppix won't connect on boot. To resolve this, run this commmand: update-rc.d ppp default
![]()
![]()
![]()
![]()
![]()
yup works nicely... now its time to get used to knoppix =)
thanks for the help shah
Seagate Exos X16 (7200RPM, 3.5", SATA III, 256MB Cache) 16TB Internal Enterprise
$110.00
Seagate ST8000NM0055 8TB 7200RPM 256MB SATA 6.0 Gb/s 3.5" Enterprise Hard Drive
$41.62
HITACHI HUS724040ALA640 4TB 7200RPM 64MB SATA 6.0Gb/s 3.5" HARD DRIVE ZERO HOURS
$52.00
Seagate ST1000VM002 1TB 64MB SATA6Gb/s 3.5" (Low Power) Hard Drive -PC, CCTV DVR
$24.99
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$79.99
Seagate ST12000NM0127 12TB 256MB 7200RPM 3.5" SATA 6.0Gb/s Enterprise Hard Drive
$93.99
WD Ultrastar DC HC530 14TB SATA 6G 3.5" 7200RPM Enterprise HDD - WUH721414ALE604
$110.00
HGST Ultrastar HE10 10TB SATA 6.0Gb/s 7200 3.5" Datacenter HDD - HUH721010ALE601
$79.99
Western Digital DC HC320 Ultrastar 8TB 7200RPM SATA HD, HUS728T8TALE6L4, 0B36404
$99.00
Western Digital 4TB Internal 7.2KRPM 3.5" (WD4000FYYZ) SATA Hard Drive ZERO HOUR
$69.99