-
Horizontal Sync
I'm using Knoppix 3.4 with a Panasonic S17 monitor which accepts input signals with horizontal frequency 30kHz to 69kHz and vertical frequency 50Hz to 160Hz. Problem is the horizontal sync is off and my screen has several copies of the page to be shown which are at about a 45 degree angle tilted left and which slide across the screen. Knoppix hsync is 78kHz which I assume is the problem. Am I correct and, if so, how can it be fixed? I tried to boot using the option Knoppix vsync=85 hsync=69 but then the program stops responding. I'm using an Athlon cpu at 850MHz. My purpose in using Knoppix is to rescue a data partition on an unbootable Windows machine. Any help will be greatly appreciated.
-
RE: Hsync
try the following
knoppix screen=1024x768 vsync=90 hsync=75
on the monitor I was using before it finally died I had to use
knoppix screen=1024x768 vsync=60 hsync=60
knoppix's default is 1280x1024, my monitor only went to 1024x768.
my monitor wouldn't lock onto vsync above 60.
( should have, but wouldn't.....)
any vga monitor should work at 800x600 vsync=60 hsync=60
.... unless the smoke got out of one of the parts.....
Similar Threads
-
By jiohdi in forum The Lounge
Replies: 0
Last Post: 01-13-2005, 07:35 PM
-
By mikejn1 in forum General Support
Replies: 0
Last Post: 11-29-2004, 04:50 PM
-
By lothario in forum Networking
Replies: 0
Last Post: 03-15-2004, 01:32 AM
-
By Leeb in forum General Support
Replies: 9
Last Post: 01-22-2004, 07:26 AM
-
By Tony in forum General Support
Replies: 3
Last Post: 12-28-2002, 11:17 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
Dell PowerEdge M640 Dual Bay 2.5" SFF Blade Server Barebone No Processors No RAM
$250.00
Cisco UCS 5108 Blade Server Chassis Enclosure 8x B200 M4 16x E5-2640v3 128gb
$599.99
Dell PowerEdge M620 Blade Server
$39.99
2 x HP ProLiant BL460c (447707-B21) Blade Servers No RAM No HDD
$30.00
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
HP Proliant BL460c G10 Gen10 Blade Server No CPU/No Mem/No Drives/P204i-B
$329.99
HP ProLiant BL460C G7 Blade Server 2x Intel Xeon 3.06Ghz X5667 QLogic QMH2462
$28.95
Dell PowerEdge M620 Blade Server 2x E5-2670 2.6Ghz 16-Cores 256gb 2x 146gb 15k
$244.99
Cisco UCSB-5108-AC2 UCS AC2 8-Slot Blade Server CTO Chassis - Barebones
$199.99