-
Horizontal Sync
I'm using Knoppix 3.4 with a Panasonic S17 monitor which accepts input signals with horizontal frequency 30kHz to 69kHz and vertical frequency 50Hz to 160Hz. Problem is the horizontal sync is off and my screen has several copies of the page to be shown which are at about a 45 degree angle tilted left and which slide across the screen. Knoppix hsync is 78kHz which I assume is the problem. Am I correct and, if so, how can it be fixed? I tried to boot using the option Knoppix vsync=85 hsync=69 but then the program stops responding. I'm using an Athlon cpu at 850MHz. My purpose in using Knoppix is to rescue a data partition on an unbootable Windows machine. Any help will be greatly appreciated.
-
RE: Hsync
try the following
knoppix screen=1024x768 vsync=90 hsync=75
on the monitor I was using before it finally died I had to use
knoppix screen=1024x768 vsync=60 hsync=60
knoppix's default is 1280x1024, my monitor only went to 1024x768.
my monitor wouldn't lock onto vsync above 60.
( should have, but wouldn't.....)
any vga monitor should work at 800x600 vsync=60 hsync=60
.... unless the smoke got out of one of the parts.....
Similar Threads
-
By jiohdi in forum The Lounge
Replies: 0
Last Post: 01-13-2005, 07:35 PM
-
By mikejn1 in forum General Support
Replies: 0
Last Post: 11-29-2004, 04:50 PM
-
By lothario in forum Networking
Replies: 0
Last Post: 03-15-2004, 01:32 AM
-
By Leeb in forum General Support
Replies: 9
Last Post: 01-22-2004, 07:26 AM
-
By Tony in forum General Support
Replies: 3
Last Post: 12-28-2002, 11:17 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Dell PowerEdge M610 Blade Server E5620@2.2GHZ (6x)8GB RAM (2x)146GB 15K SAS HDD
$75.00
Dell PowerEdge R720XD Xeon E5-2680 V2 2.8GHz 20 Cores 256GB RAM 12x4TB
$510.00
DELL PowerEdge R730 Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45
$275.00
Dell PowerEdge R630 2x Xeon E5-2630 V4 2.20GHZ 128GB DDR4-2133MHZ 2x 750W PSU
$170.95
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell PowerEdge R620 Server 2x Xeon E5-2620 @ 2.0GHz 64GB RAM NO HDDs
$108.96
Dell PowerEdge R730, 2 sinks, SystemBoard, 8 trays,H330,Idrac 8 exp, 2x750w Psu
$135.00
Dell PowerEdge R620 Server - 256GB RAM, 2x8c CPU, 128Gb SSD/3x600Gb SAS, Proxmox
$320.00
Dell PowerEdge R430 3.5 1U 2x E5-2666 v3 2.9ghz 20-Cores 128gb 4x Trays 2x 550w
$289.99
DELL PowerEdge R630 8SFF Server 2x E5-2690v4 2.6GHz =28 Cores 128GB H730 4xRJ45
$444.00