What is the exact error message that Knoppix gives you and when does it happen?
Have you tried 'modprobe 3c59x' ?
What about disabling the automatic IRQ assigning in your BIOS?
Have you tried any cheat codes?
Hello;
Knoppix say that my 3com 3c905 NIC is not supported...
The card is detectet by the PCI-Infocenter as a 3c905B 100base-TX.
What can I do? Is there a download site with the missing Knoppix/Debian drivers?
Thanks for help...
Mottek
What is the exact error message that Knoppix gives you and when does it happen?
Have you tried 'modprobe 3c59x' ?
What about disabling the automatic IRQ assigning in your BIOS?
Have you tried any cheat codes?
I'm using that same card right now and it works perfectly for me. It is using the module (3c59x) mentioned above. I did not have to do anything for it to be detected it was automatically setup and used so there might be a problem with your CD did you test it to make sure it got copied and burnt properly.
IBM QRadar xx29 Server 4412Q2A
$200.00
IBM Power S822 12-Bay Server System Power8 Core 3.42Ghz DVD-Rom Drive 64GB No HD
$399.99
IBM SYSTEM x3200 M2 Server - HDD wiped, No OS
$75.00
IBM Power 720 POWER7 00E6516 3.6GHz CPU 64GB RAM Server
$209.98
$16000.00
IBM 7944AC1 System x3550 M3 Server 1*Intel Xeon X5650 2.67GHz 4GB SEE NOTES
$27.25
IBM Power S822 8284-22A 12SFF Power8 3.89GHz 6-Core 64GB RAM No Bezel/HDD Server
$319.99
IBM Lenovo X3650 M5 2U 8x 2.5” CTO Rack Server – 2x HS, 2x 750W
$199.00
IBM SYSTEM x3650 M4 Xeon E5-2609 2.40GHZ 16GB DDR3-1066MHZ 2x 550W PSU TESTED
$109.95
IBM System X3500 M4 7383AC1 (E5-2650 v2 2.60GHz - 192GB RAM - M2000 - NO OS/HDD)
$294.92