i think you should replace the system and then try the same CD. i know for sure that CD is good and dont know much about your system
hope this helps.
Well I will post my problem again in orther to get closer to the end of the trouble.
I have a PIII 450 Mhz. Mother PCCHIPS 478LMR all on board except the mothem. A HD samsumg 8 Gb. A CD Reader Samsumg, and a sony CD RW (16x8x32).
Well Iīve tried many times booting Knoppix but I have any succes.
When I starts using EXPERT I reach the part that said:
SCSI0=last updates emulations for ide atapi devives
Some things I could read while booting that seem errors was:
......
partition check:
hda=hda1
ide: late registration of driver
......
When I use FAILSAFE it says:
Welcome to K.O.P.P.I.X linux live linux-on-cd!
Looking for cdrom in: /dev/hdb
and it hungs.
When I starts using:
knoppix vga=normal screen=800x600 ram=120M desktop=icewm
It says:
loading vmlinuz..........
loading miniroot.gz.........
Rady
Uncomoresing linux....OK booting the kernell
It makes a little screen movement and thats all.
When I starts without VGA=normal, Tux appears and thats it!
I will be very pleased if you help me!
Thaks in advance.
i think you should replace the system and then try the same CD. i know for sure that CD is good and dont know much about your system
hope this helps.
!?!!???!!!Originally Posted by certifieduser
Seriously, what knoppix version? You might try an older version, there have been some changes with CD access since the 2.6 kernel that might be affecting your startup.
Also, try the CD in a different computer. Always possible it's a dodgy burn.
Don't get me wrong, but I think you got a mobo that not linux friendly, I had similar mobo on my other pc and can't get it to work with linux for 4 years now.
![]()
![]()
Iīve tested the cd in others machines and it works properly, the version is 3.3. I thought many times that my mobo isnīt linux compatible, but I have read many articles saying that they use linux with a mobo not so diferent from mine, I think there can be an error with the CD Reader, I will change some things, and try how it works, ŋdo you think that a debian will work?
Thank you, I will apreciate further information.
PD: WHAT DO YOU MEAN TO REPLACE SYSTEM certifieduser??????
Lot of 10 4GB PC4-2666V Laptop Ram / Memory - Mixed (SK Hynix, Kingston, etc.)
$109.99
A-Tech 8GB DDR3 1600 PC3-12800 Laptop SODIMM 204-Pin Memory RAM PC3L DDR3L 1x 8G
$13.99
8GB PC3L-12800S 1600MHz SODIMM DDR3 RAM | Grade A
$12.00
Team T-FORCE VULCAN Z 32GB (2 x 16GB) PC RAM DDR4 3200 (PC4 25600) Memory
$54.99
HyperX FURY DDR3 8GB 16GB 32GB 1600 MHz PC3-12800 Desktop RAM Memory DIMM 240pin
$15.90
Crucial DDR3L 16GB 1600 2x 8GB PC3-12800 Laptop SODIMM Memory RAM PC3 16G DDR3
$13.50
A-Tech 8GB PC3-12800 Desktop DDR3 1600 MHz Non ECC 240-Pin DIMM Memory RAM 1x 8G
$13.99
Team T-FORCE VULCAN Z 16GB (2 x 8GB) 288-Pin PC RAM DDR4 3200 (PC4 25600) Intel
$33.99
$250.00
G.SKILL Trident Z5 Neo RGB Series 32GB (2 x 16GB) 288-Pin PC RAM DDR5 6400 (PC5
$110.00