Some news
i've tried to boot using anotehr machine, and it works.
So, it seems to be a machine-dependant problem.
Strange, as the same laptop was perfectly supported with Knoppix 3.6
I'm posting it here, as bug tracker seems not available.
i was using a Knoppix 3.6 as network OS :
first, starting Knoppix "normally", starting terminal server, getting miniroot.gz and vmlinuz, putting it in a PXEgrub, mouting the ISO of Knoppix, and booting from network the Knoppix 3.6.
Was working perfectly.
As Knoppix 3.7 is available, i've done the same.
But, when i boot from the network, it works, goes to "Autoconfiguring Devices" and then, some lines after, it stop.
Here is what's on the screen from "Autoconfiguring devices" to the "crash" :
The laptop used is a Toshiba Satellite Pro 6000Code:Autoconfiguring devices.. [------------------------] Done. Mouse is Primax Electronics, Ltd Kensington Mouse-in-a-box at /dev/input/mice Soundcard: Acer Laboratories Inc. [ALi]|M5451 PCI South Bridge Audio driver=trident AGP Bridge detected. Video is Trident Microsystems|CyberBlade XPAi1, using XFree86(trident) Server Monitor is Generic Monitor, H:28.0-96.0kHz, V:50.0-75.0Hz Using Modes "1024x768" "800x600" "640x480" Enabling DMA acceleration for: hda [TOSHIBA MK2018GAP] Enabling DMA acceleration for: hdc [CD-224E-BA] Scanning for Harddisk partitions and creating /etc/fstab... Done. Network device eth0 detected, DHCP broadcasting for IP (Backgrounding) /etc/init.d/rcS: line 43: 918 Bus error $i start /etc/init.d/rcS: line 62: /bin/run-parts: Input/output error INIT: Entering runlevel: 5 INIT: cannot execute "/etc/init.d/rc" bash: /etc/bash_completion: line 4418: syntax error: unexpected end of file INIT: cannot execute "/etc/init.d/xsession"
What i don't understand is " Network device eth0 detected, DHCP broadcasting for IP (Backgrounding)", as eth0 has already an IP address, and as i launch the kernel with the following :
thanks for your helpCode:title Knoppix kernel (nd)/boot/knoppix-vmlinuz nfsdir=192.168.0.3:/partage/knoppix-cd/ lang=fr vga=792 ramdisk_size=100000 BOOT_IMAGE=knoppix module (nd)/boot/knoppix-miniroot.gz
Some news
i've tried to boot using anotehr machine, and it works.
So, it seems to be a machine-dependant problem.
Strange, as the same laptop was perfectly supported with Knoppix 3.6
it's solved, simply by adding nodhcp to the commandline.
HPE BL460c G10 ProLiant Blade | 2x Silver 4110 | 16GB | P204I | 2x300GB 10KRPM
$1419.00
HPE BL460c G10 ProLiant Blade | 2x Silver 4110 | 32GB | P204I | 2x900GB 10KRPM
$1499.00
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
Dell PowerEdge M630 Blade Server 1x Xeon E5-2630 v4 CPU / Motherboard P/N 0R10KG
$69.99
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
HP ProLiant BL460c Server Blade (2 x CPU) 24GB RAM/No Drives
$45.60
Dell PowerEdge VRTX 2x PowerEdge M630 Blade Server 512GB Ram Total w/ Rails
$1750.00
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99
Dell PowerEdge M620 Blade Server
$39.99