Try making the hda1 filesystem by hand
For a ext2 partition
For a ext3 partitionCode:mke2fs -v /dev/hda1
Code:mke2fs -vj /dev/hda1
I have knoppix 3.6 on disc and am trying to install it, i will go through the steps i take to install it...
1. boot knoppix fro, disc using failsafe (gets stuck otherwise)
2. ctrl alt f1
3. cfdisk
4. 2 partitions (3.5gig and .5gig), write, exit
5. reboot
6. mkswap dev/hda2/
7. knopix-installer do config
8. install
9. error i get:
How do I get past this error?Error forrmatting of failed. Some messages from mkfs.ext3...
Try making the hda1 filesystem by hand
For a ext2 partition
For a ext3 partitionCode:mke2fs -v /dev/hda1
Code:mke2fs -vj /dev/hda1
Makes no odds same thing happens, could it something to do with it being read only or something? What is the difference between ext3 and 2? Any way of skipping the format part of the installation, or manual install?
Ext3 is really just ext2 with a file journal.Originally Posted by Le0
So is there a way of installing it?
SAS - HGST Ultrastar 7K4000 HUS724040ALA640 0F14688 3.5" 4TB 7.2K RPM 64MB HDD
$19.99
HITACHI HUS724040ALA640 4TB 7200RPM 64MB SATA 6.0Gb/s 3.5" HARD DRIVE ZERO HOURS
$52.00
Seagate ST1000VM002 1TB 64MB SATA6Gb/s 3.5" (Low Power) Hard Drive -PC, CCTV DVR
$24.99
Seagate ST8000NM0055 8TB 7200RPM 256MB SATA 6.0 Gb/s 3.5" Enterprise Hard Drive
$34.41
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$74.99
Seagate ST12000NM0127 12TB SATA 6Gb/s 256MB 7200RPM 3.5" Enterprise Hard Drive
$99.99
1TB HDD/SSD 2.5" SATA Hard Drive with Windows 10 or Windows 11 Pro Installed
$18.99
Seagate Exos X20 18TB SATA 6Gb/s 3.5" Enterprise Hard Drive - ST18000NM003D
$168.00
Western Digital 4TB Internal 7.2KRPM 3.5" (WD4000FYYZ) SATA Hard Drive ZERO HOUR
$89.99
Western Digital Gold Enterprise 4TB,7200 RPM Internal Hard Disk Drive WD4002FYYZ
$39.95