Results 1 to 2 of 2

Thread: "/dev/modem" link disappears at reboot of hdd inst

  1. #1
    Junior Member
    Join Date
    Sep 2004
    Location
    Italy
    Posts
    3

    "/dev/modem" link disappears at reboot of hdd inst

    Hello everybody
    A small recap of my predicament: I've got a HSF connexant modem on laptop where I've installed Knoppix 3.4.
    I've succesfully installed Linuxant drivers (debian package) for the modem, the only problem is that at reboot the /dev/modem link disappears.
    I was suggested to:
    "The next time you reboot, it should suffice to only create the Ports
    # mknod /dev/ttySHSF0
    # ln -sf /dev/ttySHSF0 /dev/modem"
    But this is a temporary solution, as the /dev/modem link disappears every time I boot....and I have to go through the procedure once again
    At this point I guess the real problem is Knoppix and not the drivers...
    Any suggestions on how to make the link persistent?
    Regards
    Artikid

  2. #2
    Senior Member registered user
    Join Date
    May 2003
    Posts
    981

    Re: "/dev/modem" link disappears at reboot of hdd

    Quote Originally Posted by artikid
    Hello everybody
    A small recap of my predicament: I've got a HSF connexant modem on laptop where I've installed Knoppix 3.4.
    I've succesfully installed Linuxant drivers (debian package) for the modem, the only problem is that at reboot the /dev/modem link disappears.
    I was suggested to:
    "The next time you reboot, it should suffice to only create the Ports
    # mknod /dev/ttySHSF0
    # ln -sf /dev/ttySHSF0 /dev/modem"
    But this is a temporary solution, as the /dev/modem link disappears every time I boot....and I have to go through the procedure once again
    At this point I guess the real problem is Knoppix and not the drivers...
    Any suggestions on how to make the link persistent?
    Regards
    Artikid
    Is only the link /dev/modem disappearing or is /dev/tty/SHSF0 being removed also?
    /dev/modem is probably being removed by this section of the /etc/init.d/knoppix-autoconfig script:
    Code:
    # Delete obsolete links and files before starting autoconfig
    if ! checkbootparam "nohwsetup"; then
    rm -f /dev/cdrom* /dev/cdwriter* /dev/mouse* /dev/modem* /dev/scanner* \
          /etc/sysconfig/i18n /etc/sysconfig/keyboard /etc/sysconfig/knoppix \
          2>/dev/null
    fi
    so the simplest solution would seem to be to edit the script to remove this deletion.
    However, this MAY cause problems. I have done a similar 'fix' to prevent /dev/cdrom from being removed which seemed to work OK with 2.6 kernel but resulted in an additional /dev/cdrom being created each time the 2.4 kernel was run until I had about 10 of them.
    I think what is needed is an additional startup script to run as the last boot script which checks for /dev/modem & creates one only if there is not one existing.
    Also, /etc/init.d/knoppix-autoconfig is only used for a knoppix or beginner style HD install, for a Debian install I'm not sure what the startup script is.

Similar Threads

  1. Replies: 5
    Last Post: 06-12-2008, 01:07 AM
  2. "KPPP Cannot find modem /dev/modem"
    By wsg in forum Hardware & Booting
    Replies: 23
    Last Post: 10-23-2004, 12:06 PM
  3. USR 56k PCI modem "busy"/"not found",rec
    By oman in forum General Support
    Replies: 0
    Last Post: 08-03-2004, 06:44 PM
  4. For the web forum : a "my threads" link
    By beforewisdom in forum Ideas
    Replies: 2
    Last Post: 04-21-2003, 09:28 PM
  5. Locate Knoppix "group" in "K" menu
    By Juny in forum General Support
    Replies: 4
    Last Post: 03-14-2003, 09:02 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Cisco Nexus N9K-C92160YC-X 48P 25GbE SFP28 6P QSFP+/QSFP28 PE Switch picture

Cisco Nexus N9K-C92160YC-X 48P 25GbE SFP28 6P QSFP+/QSFP28 PE Switch

$499.00



Cisco Nexus 48-Port 10G SFP+ Switch N9K-93128TX w/ 9K-M12PQ 12-Port 40G QSFP picture

Cisco Nexus 48-Port 10G SFP+ Switch N9K-93128TX w/ 9K-M12PQ 12-Port 40G QSFP

$112.49



Cisco WS-C2960X-48FPD-L 48 V07 POE+ GE+2 10G SFP+, LAN BASE 740W w/ C2960X-Stack picture

Cisco WS-C2960X-48FPD-L 48 V07 POE+ GE+2 10G SFP+, LAN BASE 740W w/ C2960X-Stack

$110.00



Cisco C9300-NM-8X Catalyst 9300 8 x 10GE Network Module Switch picture

Cisco C9300-NM-8X Catalyst 9300 8 x 10GE Network Module Switch

$375.00



Cisco C3850-NM-2-10G 2 Port Network Exp.Module for 3850 picture

Cisco C3850-NM-2-10G 2 Port Network Exp.Module for 3850

$30.99



Cisco Nexus N3K-C3064PQ-10GX 48P 10GbE SFP+ 4P QSFP+ Switch (Fair) picture

Cisco Nexus N3K-C3064PQ-10GX 48P 10GbE SFP+ 4P QSFP+ Switch (Fair)

$85.00



Cisco CISCO2901/K9 Gigabit Integrated Services Router w/ 2 FXO EHWIC picture

Cisco CISCO2901/K9 Gigabit Integrated Services Router w/ 2 FXO EHWIC

$39.98



Cisco Fibre Channel Shortwave SFP+ (DS-SFP-FC32G-SW) Sealed With Hologram picture

Cisco Fibre Channel Shortwave SFP+ (DS-SFP-FC32G-SW) Sealed With Hologram

$54.19



Cisco Nexus N3K-C3172PQ-10GE 48P 10GbE 6P QSFP+ Switch N3K-C3172PQ-10GE picture

Cisco Nexus N3K-C3172PQ-10GE 48P 10GbE 6P QSFP+ Switch N3K-C3172PQ-10GE

$189.00



CISCO MERAKI MS120-24P-HW 24-PORT GIGABIT CLOUD MANAGED PoE SWITCH - UNCLAIMED picture

CISCO MERAKI MS120-24P-HW 24-PORT GIGABIT CLOUD MANAGED PoE SWITCH - UNCLAIMED

$98.55