Is it sda1? Do: dmesg|grep sd to find out.
if it is, do:
su
mkdir /mnt/sda1
mount -t auto /dev/sda1 /mnt/sda1
Hi,
it tried to mount my old 2GB USB-HDD but i had no sucess.
Console:
Output:Code:mount -t auto /dev/sda1 /mnt/sda
can anybody help me ?Code:/dev/sda1 ist kein gültiges blockorientiertes Gerät
MrT
HDD-Install-Knoppix 3.6
usbtree OUTPUT:
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=ehci_hcd/4p, 480M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=usb-uhci/2p, 12M
|__ Port 2: Dev 2, If 0, Class=stor., Driver=usb-storage, 12M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=usb-uhci/2p, 12M
|__ Port 1: Dev 4, If 0, Class=vend., Driver=usbscanner, 12M
|__ Port 2: Dev 5, If 0, Class=vend., Driver=none, 12M
Is it sda1? Do: dmesg|grep sd to find out.
if it is, do:
su
mkdir /mnt/sda1
mount -t auto /dev/sda1 /mnt/sda1
dmesg|grep sd
OUTPUT:
Info fld=0x0, Current sd0b:00: sns = f0 3
of course i had make a dir called sda but the dev is the important thing not the dir-name.
for dev i tried diferent names such as: sda1 sda sda2 - 7 sdax sdb sdb1 and so on
MrT
try to isolate the problem
try cd based boot 3.6 and try to mount the usb based hdd and see the problem continues.
try cd based boot 3.4 and try to do the same.
hook the usb based hdd before you boot the system.
see the results and you should have the clue to fix it.
hope this helps.
Not very promising. Can you see it with qtparted?Originally Posted by MrT
Well, sorry, but sometimes it's difficult to tell how much people have experience with linux.of course i had make a dir called sda but the dev is the important thing not the dir-name.
I suppose there's no point asking if the drive is partitioned&formatted
qtparted couldn't find the HDDI suppose there's no point asking if the drive is partitioned&formatted
The USB-HDD had 1 Partion and is formated in FAT32
MrT
P.S. the USB-HDD works on Redmond and my Suse Workstation on the fly, what's the next step. Kernel 2.4.27
Lot of 10pcs Brocade 57-1000012-01 8Gbps SWL 850nm SFP+ Optical Transceivers
$19.00
Cisco QSFP-100G-LR4-S 100GBASE-LR4 QSFP28, 1310nm, 10km, LC, SMF
$335.99
Cisco SFP-10/25G-CSR-S 10/25GBASE-CSR SFP28, 850nm, 100m, LC,
$54.00
Silicom (PE210G2SPI9A-XR) 10Gb Dual Port SFP+ PCIe Ethernet Adapter Low Profile
$19.99
Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03
$8.00
NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping*
$18.00
Brand New Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Module 1310nm 10km SMF LC
$13.89
Genuine Cisco GLC-TE 30-1475-01 V01 1000BASE-T SFP COPPER RJ-45 100M TRANSCEIVER
$11.90
LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module
$89.00
10 PCS Cisco GLC-LH-SMD 10-2625-01 1310nm SFP Transceiver Module
$85.00