Is it sda1? Do: dmesg|grep sd to find out.
if it is, do:
su
mkdir /mnt/sda1
mount -t auto /dev/sda1 /mnt/sda1
Hi,
it tried to mount my old 2GB USB-HDD but i had no sucess.
Console:
Output:Code:mount -t auto /dev/sda1 /mnt/sda
can anybody help me ?Code:/dev/sda1 ist kein gültiges blockorientiertes Gerät
MrT
HDD-Install-Knoppix 3.6
usbtree OUTPUT:
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=ehci_hcd/4p, 480M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=usb-uhci/2p, 12M
|__ Port 2: Dev 2, If 0, Class=stor., Driver=usb-storage, 12M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=usb-uhci/2p, 12M
|__ Port 1: Dev 4, If 0, Class=vend., Driver=usbscanner, 12M
|__ Port 2: Dev 5, If 0, Class=vend., Driver=none, 12M
Is it sda1? Do: dmesg|grep sd to find out.
if it is, do:
su
mkdir /mnt/sda1
mount -t auto /dev/sda1 /mnt/sda1
dmesg|grep sd
OUTPUT:
Info fld=0x0, Current sd0b:00: sns = f0 3
of course i had make a dir called sda but the dev is the important thing not the dir-name.
for dev i tried diferent names such as: sda1 sda sda2 - 7 sdax sdb sdb1 and so on
MrT
try to isolate the problem
try cd based boot 3.6 and try to mount the usb based hdd and see the problem continues.
try cd based boot 3.4 and try to do the same.
hook the usb based hdd before you boot the system.
see the results and you should have the clue to fix it.
hope this helps.
Not very promising. Can you see it with qtparted?Originally Posted by MrT
Well, sorry, but sometimes it's difficult to tell how much people have experience with linux.of course i had make a dir called sda but the dev is the important thing not the dir-name.
I suppose there's no point asking if the drive is partitioned&formatted
qtparted couldn't find the HDDI suppose there's no point asking if the drive is partitioned&formatted
The USB-HDD had 1 Partion and is formated in FAT32
MrT
P.S. the USB-HDD works on Redmond and my Suse Workstation on the fly, what's the next step. Kernel 2.4.27
Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch
$40.12
Juniper Networks EX2300-C 12-Port 2XSFP Uplinks PoE+ Switch P/N: EX2300-C-12P
$299.99
JUNIPER EX3400-48P 48x 1GB PoE+ RJ-45 4x 10GB SFP+ 2x 40GB QSFP+, DUAL AC POWER
$210.00
Juniper Networks EX4300-48T 48 Port Gigabit 4 QSFP 40G 2xPSU AFO Network Switch
$89.00
Juniper Networks EX3300-24P | 24 Port Gigabit Network Switch w/ Power cord
$53.99
Juniper EX3400-48P 48-Ports PoE+ 4x SFP+ and 2x QSFP+ Managed Switch Tested
$205.00
Juniper EX4600-40F-AFI 24 SFP+/SFP Ports 4 QSFP+ Ports Dual AC Switch
$999.00
JUNIPER EX3300-48T 48 PORT SWITCH TESTED & RESET w/ Rack Ears
$49.99
New Factory Sealed Juniper EX2300-48P Networks 48-Port Managed Ethernet Sealed
$499.00
Juniper Networks EX3300-48T 48-Port PoE+ Gigabit Ethernet Switch 4x SFP+ TESTED
$99.99