I've booted 3.4 and 3.7 on a PII/400 with no problems.
lspci shows 2 Intel Ethernet Pro 100 network cards
ifconfig just shows the lo interface
ifconfig eth0 shows the specs but no ip address
ditto for ifconfig eth1
pump fails
I tried /etc/init.d/networking restart with no change
/etc/network/interfaces only shows the lo lines, no eth0 or eth1
netcardconfig shows both cards but dhcp broadcast fails on both. I've only got eth0 plugged in atm but I wanted to be thorough.
Any suggestions?
DELL PowerEdge R430 8SFF 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$226.00
Dell PowerEdge R630 Server 2x E5-2680 V4 = 28 Cores S130 32GB RAM NEW 480GB SSD
$197.99
Dell Poweredge R630 Server 2x E5-2620 V4 =16 Cores | S130 | 32GB RAM | 2x trays
$159.99
Cisco UCS C240 M4 2U Server w/ 2x E5-2680v4, NO RAM
$49.99
Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330
$182.65
Lenovo ThinkServer TS140 Xeon E3-1225v3 3.20GHz 16GB RAM Tower Server Needs HDD
$99.99
Dell PowerEdge R730 16-Bay 2.5” 2xE5-2695 v3 2.3Ghz 64GB iDRAC8 Ent H730 2x750W
$250.00
Dell PowerEdge R720xd 26HDD 300gb 2.5-inch E5-2697 X 2CPU 384RAM 7.2 Tb HDD 
$180.00
Dell Poweredge R730xd LFF 14-Bay 2U Server | Choose Your CPU & RAM Config
$489.99
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 240GB SSD 2x 10GBE
$259.00