On my compaq lcd, I use this cheatcode: vga-normal
Try boot cd using this cheatcode or any other cheatcode. If it boots okay, then you can append that codes in lilo.
![]()
![]()
I just purchased a new LCD monitor and when I boot from my HD it says "not supported". Yep, I tossed in the cd and was able to use framebuffer mode, and it worked but not very good. What would be the best way to optimize thes monitor and how do I modify my HDD install. Yes, I still can hook-up the old monitor as a temporary solution, but I would like to use the new one.
On my compaq lcd, I use this cheatcode: vga-normal
Try boot cd using this cheatcode or any other cheatcode. If it boots okay, then you can append that codes in lilo.
![]()
![]()
I can try that. As I said, it works in framebuffer mode when I boot the live cd. Your suggestion may be more optimized, which is what i'm looking for. How do I modify lilo after I try this?
JUst hook your old monitor and boot from hd.
Edit /etc/lilo.conf and append the cheatcode, ex: fb1280x1024
image=/boot/vmlinuz
label="Linux"
root=/dev/hdc5
initrd=/boot/initrd.img
append="devfs=mount hdd=ide-scsi splash=silent acpi=ht fb1280x1044"
read-only
**This is not a real lilo.conf, I just made it up. The important part is "append="
line where you add cheatcodes.
After editing and save the lilo.conf , you need to update lilo.
Open root konsole and run this command: lilo
![]()
![]()
XGS-PON ONU SFP+ Stick MAC SC/APC 1270/1577nm -40 to 85°C 10G/10G XGSPON ONT
$199.99
Cisco WS-X4712-SFP+E Catalyst 4500 Series Line Card 10GbE 12-Port Module SFP+
$59.00
SFP+ 10G BiDi WDM SFP Module 10km 20km 40km 60km 80km LC compatible Cisco. lot
$50.00
GENUINE CISCO 25G Base Active Optical SFP cable 3M SFP-25G-AOC2M NEW SHIPS FREE
$50.00
🔥🔥🔥Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver 10-2415-03 🔥🔥🔥
$8.00
INTEL 10G SFP+ SR SFP E10GSFPSR FTLX8571D3BCV-IT For X520-DA2 X520-SR2 X710-DA2
$9.49
Cisco CVR-X2-SFP10G V03 TenGig Module
$19.99
Lot of 10 Cisco SFP-10G-SR 10-2415-03 V03 10GBase-SR 850nmSFP+Transceiver Module
$34.95
Dell X1018 X-Series Smart Managed Switches 16-Port Gigabit 2-Port SFP Switch
$45.00
Lot of 8 Finisar FTLX1471D3BCL SFP+ 10GBASE-LR 10km 1310nm SMF LC , SFP-10G-LR
$55.00