You could just burn the iso you have and at boot, enter the cheatcode
There probably is a more elegant way to change the image but if all you want to do is run knoppix in english, I think this will work.Code:knoppix lang=us
A friend gave me a copy of KNOPPIX_3.4-2004-05-17-DE.iso. The md5sum for this checks out OK.
Of course the language for this will be German by default, so before considering burning a CD I went to
http://homepage.hispeed.ch/py430/knoppix/index.html
and got knoppixlang.zip. I also installed Python 2.3 on my Win2000Pro pc. I put the abovementioned Knoppix.iso, the unzipped knoppixlang.py etc files & Python 2.3 all in the same folder on a FAT32 drive.
So I open the python GUI console and enter the line suggested by the knoppixlang webpage:
knoppixlang.py --lang=us KNOPPIX_V3.4-2004-05-17-DE.iso
and i get ----SYNTAX ERROR!!!
Variants like (eg) >>>python knoppixlang.py --lang=us KNOPPIX_V3.4-2004-05-17-DE.iso, or
knoppixlang.py --lang=en KNOPPIX_V3.4-2004-05-17-DE.iso
give other syntax errors. Also, using the python command line instead yields the same non-results.
What am I doing wrong? Is there a bug in this script? Can I change the default language of my iso to english some other way (as opposed to having to manually type it in every time I boot?)
Thanks for any help - I have a slow connection and can't realistically download the en iso.
![]()
You could just burn the iso you have and at boot, enter the cheatcode
There probably is a more elegant way to change the image but if all you want to do is run knoppix in english, I think this will work.Code:knoppix lang=us
Problem fixed - the script author was kind enough to email me directly. Thanks Chris!
The line:
python knoppixlang.py --lang=us KNOPPIX_V3.4-2004-05-17-DE.iso
has to be entered in the WINDOWS command prompt, not the python shell! You then type 'y' when prompted to replace the x instances of 'de' in the iso with 'us'.
Script works very well - my German iso was completely changed to English. All menus etc in the burnt boot CD are english.
BTW: as downloaded the iso is read-only. File permissions for the iso need to be changed to allow writing by deselecting 'read-only' in the file properties (right-click on file icon) before running the script, otherwise you get "permission denied".
Strongly recommended.![]()
1) Open and Edit the German ISO file with UltraISO
2) Extract the file isolinux.cfg from the folder boot\isolinux right clicking on the file and selecting “Extract to…”
3) Open the file with a good Hex Editor
4) Look for all the entries with “lang=de” and change them to “lang=en”. There are as many as 11 perhaps more.
5) Save the file with the hex editor
6) Use again UltraISO to inject the file back into the same folder
7) Save the file as a new ISO file.
8) The new ISO is an English bootable Knoppix
Same applies to other languages as French. Hope this helps
And the reason you don't just download the EN iso (KNOPPIX_V3.6-2004-08-16-EN.iso) is what exactly?Originally Posted by Flip
Perhaps he's got a slow conn.
DELL Hard Drive SATA 6 Gbps 8TB 512e RPM 7.2K - MG05ACA800E
$29.99
Western Digital 4TB Internal 7.2KRPM 3.5" (WD4000FYYZ) SATA Hard Drive ZERO HOUR
$69.99
Seagate ST1000VM002 1TB 64MB SATA6Gb/s 3.5" (Low Power) Hard Drive -PC, CCTV DVR
$24.99
HITACHI HUS724040ALA640 4TB 7200RPM 64MB SATA 6.0Gb/s 3.5" HARD DRIVE ZERO HOURS
$52.00
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$74.99
CISCO A03-D1TBSATA 1TB 7.2K 6G 2.5INCH SATA HDD
$9.00
Seagate ST12000NM0127 12TB SATA 6Gb/s 256MB 7200RPM 3.5" Enterprise Hard Drive
$99.99
WD Ultrastar DC HC530 14TB SATA 6G 3.5" 7200RPM Enterprise HDD - WUH721414ALE604
$110.00
My Book Desktop Hard Drive 14TB Certified Refurbished
$193.99
Western Digital 8TB Certified Refurbished My Book Hard Drive-RWDBBGB0080HBK-NESN
$124.99