outanet;
You may find that loading tohd to a FAT32 partition in the USBHD could permit Knoppix version 3.6 to load kernel2.6 in your machine.
outanet;
Pleased to hear you have had success with toram!
I am addressing this post in Knoppix2.6 in TORAM with 3GB of ram. It shows 876,088KB in memory use and 2,234,112KB of free memory in system guard display.
I find that the toram option works well if the memory setting in the toram script of linuxrc is set to at least "1000000"KB. Mine is set to "3000000"KB in the script. This requires re-master of the minirt26gz.
I have not tried to load Knoppix26 version3.6 from USBHD. I have The DVD version installed therein. I find that myconfig option is OK in TORAM mode.
I did do a strange thing; I loaded the Knoppix version 3.7CD from USBHD (DVD version therein installed) using the TORAM option and myconfig option and the system loaded (with many error messages) using the Kernel from the CD and loading to KDE in the DVD boot-up. The DVD Kernel is 2.6.3. Kernel 2.6.7 was verified as installed in uname -a.
The internet was not accessible, an error message reported that the interface device was not recognized. Thought I would mention it as a sidelight.! The memory figures were all present in the system resources and all DVD programs listed.
Experiment it is!
Good luck in getting Knoppix 3.6 running. Mine runs great as you can see from this post!
outanet;
You may find that loading tohd to a FAT32 partition in the USBHD could permit Knoppix version 3.6 to load kernel2.6 in your machine.
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99
Dell PowerEdge M620 Blade Server
$39.99
Dell PowerEdge M630 Blade Server 1x Xeon E5-2630 v4 CPU / Motherboard P/N 0R10KG
$69.99
2 x HP ProLiant BL460c (447707-B21) Blade Servers No RAM No HDD
$30.00
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
Dell Poweredge FC630 Blade Server BAREBONES No CPU, No HDD, No RAM
$75.00
Dell PowerEdge M620 Blade Server 2x E5-2670 2.6Ghz 16-Cores 256gb 2x 146gb 15k
$244.99
UCSB-B200-M4 UCS Blade Server, 2x E5-2667 V3, 256GB RAM DDR4, 2x 300GB Drives
$299.99