Results 1 to 8 of 8

Thread: PCI Sound Card on board detected but not working

  1. #1
    Junior Member
    Join Date
    Mar 2003
    Location
    Richmond BC Canada
    Posts
    3

    PCI Sound Card on board detected but not working

    The following is the extract from the pcidevicelist

    00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233 AC97 Audio Controller (rev 50)
    Subsystem: VIA Technologies, Inc.: Unknown device 4161
    Flags: medium devsel, IRQ 5
    I/O ports at e000 [size=256]
    Capabilities: <available only to root>

    When using the KNOPPIX/Configure/soundcard configure menu it reports that a PCI sound card is detected Via Technologies|VT8233 [AC97 Audio Controller but when the test sound is tried it reports
    /lib/modules/2.4.20-xfs/kernel/drivers/sound/via82Cxxx_audio: init module no such device
    insmod
    failed
    insmod sound slot -0 failed

    This is my foirst attempt at using linux so I would appreciate some easy to folow advice. (Sound works fine under Windows XP by the way)

    Stephen Rees
    Richmond BC

  2. #2
    Senior Member registered user
    Join Date
    Mar 2003
    Location
    colorado springs, colorado
    Posts
    1,933
    Enter your BIOS and disable the "automatic IRQ assignment" option. If that doesn't fix it open a terminal and type:

    dmesg

    post the output.

    I assume you are booting from the CD and have not installed it to your hard drive.

  3. #3
    Member registered user
    Join Date
    Dec 2002
    Posts
    41
    bump

  4. #4
    Junior Member
    Join Date
    Mar 2003
    Location
    Richmond BC Canada
    Posts
    3
    Quote Originally Posted by rickenbacherus
    Enter your BIOS and disable the "automatic IRQ assignment" option.

    >Sadly this is not an option in my BIOS

    If that doesn't fix it open a terminal and type:

    >dmesg

    post the output.
    knoppix@ttyp0[knoppix]$ dmesg
    Linux version 2.4.20-xfs (knoppix@Knoppix) (gcc version 2.95.4 20011002 (Debian
    prerelease)) #1 SMP Mit Jan 29 18:47:59 CET 2003
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000000dff0000 (usable)
    BIOS-e820: 000000000dff0000 - 000000000dff8000 (ACPI data)
    BIOS-e820: 000000000dff8000 - 000000000e000000 (ACPI NVS)
    BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
    223MB LOWMEM available.
    On node 0 totalpages: 57328
    zone(0): 4096 pages.
    zone(1): 53232 pages.
    zone(2): 0 pages.
    Kernel command line: init=/etc/init lang=us ramdisk_size=100000 apm=power-off hd
    a=scsi hdb=scsi hdc=scsi hdd=scsi hde=scsi hdf=scsi hdg=scsi hdh=scsi vga=791 in
    itrd=miniroot.gz nomce quiet BOOT_IMAGE=knoppix BOOT_IMAGE=vmlinuz keyboard=us
    ide_setup: hda=scsi
    ide_setup: hdb=scsi
    ide_setup: hdc=scsi
    ide_setup: hdd=scsi
    ide_setup: hde=scsi
    ide_setup: hdf=scsi
    ide_setup: hdg=scsi
    ide_setup: hdh=scsi
    No local APIC present or hardware disabled
    Initializing CPU#0
    Detected 1600.006 MHz processor.
    Console: colour dummy device 80x25
    Calibrating delay loop... 3191.60 BogoMIPS
    Memory: 223620k/229312k available (1270k kernel code, 5304k reserved, 503k data,
    128k init, 0k highmem)
    Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
    Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
    Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
    Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
    Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
    CPU: L1 I cache: 0K, L1 D cache: 8K
    CPU: L2 cache: 256K
    CPU: Hyper-Threading is disabled
    CPU: After generic, caps: 3febf9ff 00000000 00000000 00000000
    CPU: Common caps: 3febf9ff 00000000 00000000 00000000
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Checking 'hlt' instruction... OK.
    Checking for popad bug... OK.
    POSIX conformance testing by UNIFIX
    mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
    mtrr: detected mtrr type: Intel
    CPU: L1 I cache: 0K, L1 D cache: 8K
    CPU: L2 cache: 256K
    CPU: Hyper-Threading is disabled
    CPU: After generic, caps: 3febf9ff 00000000 00000000 00000000
    CPU: Common caps: 3febf9ff 00000000 00000000 00000000
    CPU0: Intel(R) Pentium(R) 4 CPU 1.60GHz stepping 03
    per-CPU timeslice cutoff: 731.19 usecs.
    SMP motherboard not detected.
    Local APIC not detected. Using dummy APIC emulation.
    Waiting on wait_init_idle (map = 0x0)
    All processors have done init_idle
    PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
    PCI: Using configuration type 1
    PCI: Probing PCI hardware
    PCI: Using IRQ router default [1106/3177] at 00:11.0
    PCI: Hardcoded IRQ 14 for device 00:11.1
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Linux NET4.0 for Linux 2.4
    Based upon Swansea University Computer Society NET3.039
    Initializing RT netlink socket
    Starting kswapd
    VFS: Disk quotas vdquot_6.5.1
    vesafb: framebuffer at 0xd0000000, mapped to 0xce80d000, size 31680k
    vesafb: mode is 1024x768x16, linelength=2048, pages=19
    vesafb: protected mode interface info at c000:6e5d
    vesafb: scrolling: redraw
    vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
    Console: switching to colour frame buffer device 128x48
    fb0: VESA VGA frame buffer device
    Detected PS/2 Mouse Port.
    pty: 256 Unix98 ptys configured
    Uniform Multi-Platform E-IDE driver Revision: 6.31
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    VP_IDE: IDE controller on PCI bus 00 dev 89
    PCI: Hardcoded IRQ 14 for device 00:11.1
    VP_IDE: chipset revision 6
    VP_IDE: not 100% native mode: will probe irqs later
    VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci00:11.1
    ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hdaio, hdbMA
    ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdcio, hddMA
    hdb: C/H/S=0/0/0 from BIOS ignored
    hdb: Maxtor 6E030L0, ATA DISK drive
    hdd: HL-DT-ST CD-ROM GCR-8520B, ATAPI CD/DVD-ROM drive
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    ide1 at 0x170-0x177,0x376 on irq 15
    hdb: 60058656 sectors (30750 MB) w/2048KiB Cache, CHS=59582/16/63
    ide-cd: passing drive hdd to ide-scsi emulation.
    Partition check:
    hdb: [PTBL] [3738/255/63] hdb1 hdb2
    Floppy drive(s): fd0 is 1.44M
    FDC 0 is a post-1991 82077
    RAMDISK driver initialized: 16 RAM disks of 100000K size 1024 blocksize
    Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994
    Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak.
    Promise Fasttrak(tm) Softwareraid driver 0.03beta: No raid array found
    Highpoint HPT370 Softwareraid driver for linux version 0.01
    No raid array found
    SCSI subsystem driver Revision: 1.00
    scsi0 : SCSI host adapter emulation for IDE ATAPI devices
    Vendor: HL-DT-ST Model: CD-ROM GCR-8520B Rev: 1.00
    Type: CD-ROM ANSI SCSI revision: 02
    Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
    sr0: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.12
    NET4: Linux TCP/IP 1.0 for NET4.0
    IP Protocols: ICMP, UDP, TCP, IGMP
    IP: routing cache hash table of 2048 buckets, 16Kbytes
    TCP: Hash tables configured (established 16384 bind 16384)
    NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
    RAMDISK: Compressed image found at block 0
    Freeing initrd memory: 466k freed
    VFS: Mounted root (ext2 filesystem).
    NCR53c406a: no available ports found
    aec671x_detect:
    scsi: <fdomain> Detection failed (no card)
    megaraid: v1.18 (Release Date: Thu Oct 11 15:02:53 EDT 2001)
    megaraid: no BIOS enabled.
    DC390: 0 adapters found
    Failed initialization of WD-7000 SCSI card!
    ISO 9660 Extensions: Microsoft Joliet Level 3
    kmod: failed to exec /sbin/modprobe -s -k nls_iso8859-1, errno = 2
    kmod: failed to exec /sbin/modprobe -s -k nls_iso8859-1, errno = 2
    ISO 9660 Extensions: RRIP_1991A
    cloop: Welcome to cloop v0.68
    cloop: /cdrom/KNOPPIX/KNOPPIX: 28429 blocks, 65536 bytes/block, largest block is
    65562 bytes.
    cloop: loaded (max 1 devices)
    ISO 9660 Extensions: RRIP_1991A
    Freeing unused kernel memory: 128k freed
    Real Time Clock Driver v1.10e
    apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
    Linux Kernel Card Services 3.1.22
    options: [pci] [cardbus] [pm]
    Intel PCIC probe: not found.
    Databook TCIC-2 PCMCIA probe: not found.
    unloading Kernel Card Services
    usb.c: registered new driver usbdevfs
    usb.c: registered new driver hub
    usb-uhci.c: $Revision: 1.275 $ time 19:01:21 Jan 29 2003
    usb-uhci.c: High bandwidth mode enabled
    usb-uhci.c: USB UHCI at I/O 0xec00, IRQ 5
    usb-uhci.c: Detected 2 ports
    usb.c: new USB bus registered, assigned bus number 1
    hub.c: USB hub found
    hub.c: 2 ports detected
    usb-uhci.c: USB UHCI at I/O 0xe800, IRQ 12
    usb-uhci.c: Detected 2 ports
    usb.c: new USB bus registered, assigned bus number 2
    hub.c: USB hub found
    hub.c: 2 ports detected
    usb-uhci.c: USB UHCI at I/O 0xe400, IRQ 12
    usb-uhci.c: Detected 2 ports
    usb.c: new USB bus registered, assigned bus number 3
    hub.c: USB hub found
    hub.c: 2 ports detected
    usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
    usbdevfs: remount parameter error
    hub.c: new USB device 00:10.0-1, assigned address 2
    hub.c: USB hub found
    hub.c: 3 ports detected
    hub.c: new USB device 00:10.0-2, assigned address 3
    usb.c: USB device 3 (vend/prod 0x4b8/0x11e) is not claimed by any active driver.
    hub.c: new USB device 00:10.0-1.2, assigned address 4
    usb.c: USB device 4 (vend/prod 0x45e/0x40) is not claimed by any active driver.
    usb.c: registered new driver usbscanner
    scanner.c: 0.4.6:USB Scanner Driver
    usb.c: registered new driver usb_mouse
    usb-uhci.c: interrupt, status 3, frame# 953
    input0: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) on usb3:4.0
    usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
    usb.c: registered new driver hiddev
    usb.c: registered new driver hid
    hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
    hid-core.c: USB HID support drivers
    mice: PS/2 mouse device common for all mice
    Serial driver version 5.05c (2001-07-0 with MANY_PORTS SHARE_IRQ SERIAL_PCI IS APNP enabled
    ttyS00 at 0x03f8 (irq = 4) is a 16550A
    parport0: PC-style at 0x378 [PCSPP,TRISTATE]
    via-rhine.c:v1.10-LK1.1.14 May-3-2002 Written by Donald Becker
    http://www.scyld.com/network/via-rhine.html
    eth0: VIA VT6102 Rhine-II at 0xdffffe00, 00:07:95:db:2d:82, IRQ 12.
    eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
    Linux agpgart interface v0.99 (c) Jeff Hartmann
    agpgart: Maximum main memory to use for agp memory: 176M
    agpgart: Trying generic Via routines for device id: 3148
    agpgart: AGP aperture is 64M @ 0xe0000000
    eth0: Setting full-duplex based on MII #1 link partner capability of 45e1.
    mtrr: no more MTRRs available
    mtrr: no more MTRRs available
    mtrr: no more MTRRs available
    knoppix@ttyp0[knoppix]$


    I assume you are booting from the CD and have not installed it to your hard drive.
    >Indeed.

  5. #5
    Senior Member registered user
    Join Date
    Mar 2003
    Location
    colorado springs, colorado
    Posts
    1,933
    Well it would appear that you have a very common problem associated with the VIA onboard sound. Here's a link to a post about VIA chipsets.

    I found it interesting that thewalkingman (the same individual that bumped this post) has posted to this one as well.

    http://www.knoppix.net/forum/viewtopic.php?t=973

    Why he couldn't have said something slightly more intelligent than 'bump" is beyond me.

  6. #6
    Member registered user
    Join Date
    Dec 2002
    Posts
    41
    I bumped it to bring the issue to the forefront

  7. #7
    Senior Member registered user
    Join Date
    Mar 2003
    Location
    colorado springs, colorado
    Posts
    1,933
    Quote Originally Posted by thewalkingman
    I bumped it to bring the issue to the forefront
    I personally would not have been offended if you had mentioned that you already knew something of this particular problem. No matter- I enjoy looking at others 'dmesg' 'lspci -v' et. al. as no two are ever the same. It's a great way to learn. For example - from Stephen Rees' post I learned how much RAM, what processor, how many drives he's got and that his girlfriend is a hottie! That dmesg can tell you everything!

    I only have very old hardware and I may not know a great deal about all things Linux but I have yet to find a machine that I could not make function under Linux.

  8. #8
    Junior Member
    Join Date
    Mar 2003
    Location
    Richmond BC Canada
    Posts
    3
    Thank you to thewalkingman and rickenbacherus.

    It would appear that the on board VIA sound card has some issues that can only be resolved by a later release of the CD.

    This will certainly delay any notion I had of moving to Linux in the near future, but it is certainly interesting to experience an alternative to XP.

    Stephen

Similar Threads

  1. The sound card is detected, but no sound.
    By rahoo in forum Hardware & Booting
    Replies: 22
    Last Post: 07-22-2005, 09:36 AM
  2. sound card and mouse not working
    By ozgurgerilla in forum General Support
    Replies: 0
    Last Post: 04-16-2005, 03:08 PM
  3. on board Via network card not working with knoppix
    By casterman in forum Hardware & Booting
    Replies: 7
    Last Post: 02-28-2005, 12:36 AM
  4. Sound card not detected
    By DarkAeons in forum Hdd Install / Debian / Apt
    Replies: 0
    Last Post: 12-21-2004, 06:05 PM
  5. Compaq Deskpro sound card not detected
    By RobertB in forum Hardware & Booting
    Replies: 7
    Last Post: 02-05-2004, 06:20 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


ZipLink ZL-2CBL2-2P picture

ZipLink ZL-2CBL2-2P

$19.50



Intel - Core i9-12900K Desktop Processor 16 (8P+8E) Cores up to 5.2 GHz Unloc... picture

Intel - Core i9-12900K Desktop Processor 16 (8P+8E) Cores up to 5.2 GHz Unloc...

$347.99



Intel - Core i7-12700K Desktop Processor 12 (8P+4E) Cores up to 5.0 GHz Unloc... picture

Intel - Core i7-12700K Desktop Processor 12 (8P+4E) Cores up to 5.0 GHz Unloc...

$242.99



Intel - Core i9-14900K 14th Gen 24-Core 32-Thread - 4.4GHz (6.0GHz Turbo) Soc... picture

Intel - Core i9-14900K 14th Gen 24-Core 32-Thread - 4.4GHz (6.0GHz Turbo) Soc...

$544.99



Intel 6 Core i5-8600 3.1GHZ Desktop Processor SR3X0 picture

Intel 6 Core i5-8600 3.1GHZ Desktop Processor SR3X0

$50.00



Intel Core I7-7700K Processor (4.2 GHz, Quad-Core, LGA 1151) - SR33A picture

Intel Core I7-7700K Processor (4.2 GHz, Quad-Core, LGA 1151) - SR33A

$84.00



Intel - Core i7-14700K 14th Gen 20-Core 28-Thread - 4.3GHz (5.6GHz Turbo) Soc... picture

Intel - Core i7-14700K 14th Gen 20-Core 28-Thread - 4.3GHz (5.6GHz Turbo) Soc...

$399.99



INTEL XEON GOLD 6148 20 Core SR3B6 2.4GHZ 27.5MB Processor    @24 picture

INTEL XEON GOLD 6148 20 Core SR3B6 2.4GHZ 27.5MB Processor @24

$99.99



AMD Ryzen 7 2700X CPU Processor 3.7GHz AM4 picture

AMD Ryzen 7 2700X CPU Processor 3.7GHz AM4

$74.99



Intel Core i9-13900K Raptor Lake 24-Core (8P+16E) Desktop Processor CPU picture

Intel Core i9-13900K Raptor Lake 24-Core (8P+16E) Desktop Processor CPU

$499.00