-
agppart module..
hi..
i use knoppix3.3 ..after booting ..when it stats Starting X11..it gives following error:
Starting X11 [drm:drm_init] *ERROR * Cannot initialize the agppart module
/lib/modules/2.4.24-xfs/kernel/drivers/char/drm/i810.o: init_modules: Cannot allocate memory.
Hint: insmod erroe=rs can be caused by incorrect modules parameters.
You may find more info. In syslog or the output from dmesg.
/lib/modules/2.4.24-xfs/kernel/drivers/char/drm/i810.o: insmod /lib/modules/2.4.24-xfs/kernel/drivers/char/drm/i810.o: failed.
wht is mean by this & why this error occured?
though X server starts after that & everything works fine.
thankx.
-
Senior Member
registered user
I also was getting this error with knoppix 3.3 & with 3.4 using the 2.4 kernel (also i810 vid card). Switching to 3.4 / 2.6 kernel fixed it.
Agpgart has to do with video card acceleration, I could not use graphics-intensive applications like tuxracer until it was working.
-
IIRC I had the same memory problem with Knoppix 3.3 and i810, and solved it by adding a line for more video memory in /etc/X11/XF86config-4 :
Code:
Section "Device"
### Available Driver options are:-
# sw_cursor is needed for some ati and radeon cards
#Option "sw_cursor"
#Option "hw_cursor"
#Option "NoAccel"
#Option "ShowCache"
#Option "ShadowFB"
#Option "UseFBDev"
#Option "Rotate"
Identifier "Card0"
# The following line is auto-generated by KNOPPIX mkxf86config
Driver "i810"
VendorName "All"
BoardName "All"
# BusID "PCI:1:0:0"
VideoRam 16384
EndSection
-
Senior Member
registered user
I have also added video memory but still the agpgart module will not initialize unless I use the 2.6 kernel.
-
Hmm, makes me wish I'd remember what I did to make tuxracer run on 3.3. Wasn't there 3 different i810 display adapters to choose from, but only one worked (after adding memory). Easier to try a newer version of knoppix though.
Similar Threads
-
By madmadmod in forum Customising & Remastering
Replies: 0
Last Post: 01-15-2005, 05:14 PM
-
By Jansi in forum General Support
Replies: 0
Last Post: 08-06-2004, 02:45 PM
-
By MrAhmad in forum Customising & Remastering
Replies: 1
Last Post: 09-06-2003, 11:45 AM
-
By corwinspyre in forum Hardware & Booting
Replies: 1
Last Post: 08-15-2003, 08:38 PM
-
By Myrdhin in forum Customising & Remastering
Replies: 2
Last Post: 08-01-2003, 02:54 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Lot of 10pcs Brocade 57-1000012-01 8Gbps SWL 850nm SFP+ Optical Transceivers
$19.00
Cisco QSFP-100G-LR4-S 100GBASE-LR4 QSFP28, 1310nm, 10km, LC, SMF
$335.99
Cisco SFP-10/25G-CSR-S 10/25GBASE-CSR SFP28, 850nm, 100m, LC,
$54.00
QLogic 8G SFP+ Transceiver Module
$3.96
Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03
$8.00
NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping*
$18.00
Brand New Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Module 1310nm 10km SMF LC
$13.89
Cisco GLC-SX-MMD SFP 1000Base-SX Short Haul Module 10-2626-01 - 1 Year Warranty
$21.49
LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module
$89.00
10 PCS Cisco GLC-LH-SMD 10-2625-01 1310nm SFP Transceiver Module
$85.00