yes, mou must put your kernel into the
/remaster/knxmaster/boot/your-vmlinuz
and edit the isolinux.cfg, to tell it your vmlinuz name (if you have been changed it)
Good Luck
hey, custom kernel question for 3.4....I've built a bzImage of the kernel i want to use (its just a patched version of the one i already had...) when knoppix boots, it loads the kernel in /boot/isolinux, correct? (which is grabbed from ../master/KNOPPIX/boot/isolinux/linux2.xx) do I have to even touch the vmlinuz in .../source/KNOPPIX/boot/ ?
thanks..
yes, mou must put your kernel into the
/remaster/knxmaster/boot/your-vmlinuz
and edit the isolinux.cfg, to tell it your vmlinuz name (if you have been changed it)
Good Luck
SUN Blade X6250 Server 8GB RAM DUAL PROCESSORS 594-4531-01
$109.99
Dell PowerEdge FX2 FX2S Enclosure - 4x PowerEdge FC640 w/ 8x Gold 6132 112C 1TB
$2699.99
Dell PowerEdge FX2 FX2S Enclosure - 4x PowerEdge FC640 w/ 8x Gold 6134 64C 1TB
$3299.99
SuperMicro X8DTT-HF+ WITH ONE XEON X5650 +24GB RAM FOR CSE-827HD-R1400B
$124.99
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
2 x HP ProLiant BL460c (447707-B21) Blade Servers No RAM No HDD
$30.00
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
Dell PowerEdge M640 Dual Bay 2.5" SFF Blade Server Barebone No Processors No RAM
$250.00
Cisco UCS 5108 Blade Server Chassis Enclosure 8x B200 M4 16x E5-2640v3 128gb
$599.99
Dell PowerEdge M620 Blade Server
$39.99