Have you tried the CD on another PC to make sure you burned a good image?
Hello,
My Knoppix 3.2 won't boot.
First of all i'm not a newbie in Linux (I've already installed dozens of distros)
When the system boots i only get the message:
I've tried all the options described in help. I always get the same message (several times). I also tried booting from diskete and it's always the same.Code:ide-scsi: CoD !=0 in idescsi_pc_intr
My system is:
Pentium II 233
128 MB RAM
GeForce 2 MX
CD-RW Plextor 16x10x40
Help me please.
Have you tried the CD on another PC to make sure you burned a good image?
Did you try "knoppix noscsi" at boot? Did you also try "knoppix failsafe"? If so, what happened?
You can consider me a total noob to this, but I would like to add my 2 cents. I downloaded Knoppix 3.3 and tried to run it with the same problem (ide-scsi: CoD !=0 in idescsi_pc_intr over and over). I also tried Penguin Sleuth version 7-5-2003 (I believe it uses the 3.2 version of Knoppix). That also crashes in much the same way. I have tried noscsi and failsafe to no avail. Both seem to hang up on the IDE CD-ROM drives. The only thing that made me wonder was the fact that I use a Serial-ATA hard drive. I disabled serial-ATA all together in the BIOS, but it did not have an effect. I have tried both CD drives (same channel master and slave) to no effect.
One other thing that it griped at me about was my IRQs. It said that there was a conflict that I should resolve by setting my IRQs in the BIOS (they are PNP right now). A PCI device failed to load because of that (I think), but I didn't figure that to be the main problem.
Sorry I couldn't give an answer to this problem, but I figured maybe my situation would help diagnose the problem. I know this is late (a year after the original post), but maybe someone has found the problem by now.
HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2620V3 | NO RAM | P244BR | 2xHDD Tray
$179.00
HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2630V3 | 32GB | P244BR | 2x300GB 15K
$299.00
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
DELL PEM640 POWEREDGE M640 BLADE SERVER
$539.95
Dell PowerEdge M640 Blade Server 2x Gold 6138 CPUS 40 Cores 3.70GHz Turbo
$649.99
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
HP ProLiant BL460c Server Blade (2 x CPU) 24GB RAM/No Drives
$48.45
Supermicro H8DGT-HIBQF Server Blade 2x Opteron 6168 (2x8) 16GB Ram #73
$32.00
HP ProLiant BL460c Gen9 Blade 2x E5-2660v4 2.0GHz =28 Cores 128GB P246 650FLB
$286.00