Have you tried the CD on another PC to make sure you burned a good image?
Hello,
My Knoppix 3.2 won't boot.
First of all i'm not a newbie in Linux (I've already installed dozens of distros)
When the system boots i only get the message:
I've tried all the options described in help. I always get the same message (several times). I also tried booting from diskete and it's always the same.Code:ide-scsi: CoD !=0 in idescsi_pc_intr
My system is:
Pentium II 233
128 MB RAM
GeForce 2 MX
CD-RW Plextor 16x10x40
Help me please.
Have you tried the CD on another PC to make sure you burned a good image?
Did you try "knoppix noscsi" at boot? Did you also try "knoppix failsafe"? If so, what happened?
You can consider me a total noob to this, but I would like to add my 2 cents. I downloaded Knoppix 3.3 and tried to run it with the same problem (ide-scsi: CoD !=0 in idescsi_pc_intr over and over). I also tried Penguin Sleuth version 7-5-2003 (I believe it uses the 3.2 version of Knoppix). That also crashes in much the same way. I have tried noscsi and failsafe to no avail. Both seem to hang up on the IDE CD-ROM drives. The only thing that made me wonder was the fact that I use a Serial-ATA hard drive. I disabled serial-ATA all together in the BIOS, but it did not have an effect. I have tried both CD drives (same channel master and slave) to no effect.
One other thing that it griped at me about was my IRQs. It said that there was a conflict that I should resolve by setting my IRQs in the BIOS (they are PNP right now). A PCI device failed to load because of that (I think), but I didn't figure that to be the main problem.
Sorry I couldn't give an answer to this problem, but I figured maybe my situation would help diagnose the problem. I know this is late (a year after the original post), but maybe someone has found the problem by now.
Juniper EX4300-24T Layer 3 24 Ports Manageable Ethernet Switch 1 Year Warranty
$139.00
Juniper EX2200-C-12T-2G 12 Port L3 EX2200-C Compact Fanless Switch 1YearWarranty
$170.00
Juniper Networks EX3300-48P 48-Port PoE+ 4x SFP+ Network Switch w/ Power Cord
$43.95
JUNIPER EX3400-48P 48x 1GB PoE+ RJ-45 4x 10GB SFP+ 2x 40GB QSFP+, DUAL AC POWER
$210.00
Juniper EX3300-48P, 48 Port PoE+ Gigabit Network Switch w/ Power cord
$54.99
Juniper EX3400-48P 48-Ports PoE+ 4x SFP+ and 2x QSFP+ Managed Switch Tested
$205.00
Juniper Networks EX2200-C-12P-2G 12 Port Gigabit PoE 2 T/SFP 1G Network Switch
$129.00
EX2300-24P Juniper 24-port 10/100/1000BASE-T PoE+ 4 x 1/10GbE SFP/SFP+ UNCLAIMED
$450.00
JUNIPER EX4550-32F-AFO 32-PORT ETHERNET SWITCH 2x POWER SUPPLY - TESTED
$299.99
Juniper QFX5100-48T-AFI 48 100M/1G/10G Base-T 6 QSFP AFI
$485.00