-
agppart module..
hi..
i use knoppix3.3 ..after booting ..when it stats Starting X11..it gives following error:
Starting X11 [drm:drm_init] *ERROR * Cannot initialize the agppart module
/lib/modules/2.4.24-xfs/kernel/drivers/char/drm/i810.o: init_modules: Cannot allocate memory.
Hint: insmod erroe=rs can be caused by incorrect modules parameters.
You may find more info. In syslog or the output from dmesg.
/lib/modules/2.4.24-xfs/kernel/drivers/char/drm/i810.o: insmod /lib/modules/2.4.24-xfs/kernel/drivers/char/drm/i810.o: failed.
wht is mean by this & why this error occured?
though X server starts after that & everything works fine.
thankx.
-
Senior Member
registered user
I also was getting this error with knoppix 3.3 & with 3.4 using the 2.4 kernel (also i810 vid card). Switching to 3.4 / 2.6 kernel fixed it.
Agpgart has to do with video card acceleration, I could not use graphics-intensive applications like tuxracer until it was working.
-
IIRC I had the same memory problem with Knoppix 3.3 and i810, and solved it by adding a line for more video memory in /etc/X11/XF86config-4 :
Code:
Section "Device"
### Available Driver options are:-
# sw_cursor is needed for some ati and radeon cards
#Option "sw_cursor"
#Option "hw_cursor"
#Option "NoAccel"
#Option "ShowCache"
#Option "ShadowFB"
#Option "UseFBDev"
#Option "Rotate"
Identifier "Card0"
# The following line is auto-generated by KNOPPIX mkxf86config
Driver "i810"
VendorName "All"
BoardName "All"
# BusID "PCI:1:0:0"
VideoRam 16384
EndSection
-
Senior Member
registered user
I have also added video memory but still the agpgart module will not initialize unless I use the 2.6 kernel.
-
Hmm, makes me wish I'd remember what I did to make tuxracer run on 3.3. Wasn't there 3 different i810 display adapters to choose from, but only one worked (after adding memory). Easier to try a newer version of knoppix though.
Similar Threads
-
By madmadmod in forum Customising & Remastering
Replies: 0
Last Post: 01-15-2005, 05:14 PM
-
By Jansi in forum General Support
Replies: 0
Last Post: 08-06-2004, 02:45 PM
-
By MrAhmad in forum Customising & Remastering
Replies: 1
Last Post: 09-06-2003, 11:45 AM
-
By corwinspyre in forum Hardware & Booting
Replies: 1
Last Post: 08-15-2003, 08:38 PM
-
By Myrdhin in forum Customising & Remastering
Replies: 2
Last Post: 08-01-2003, 02:54 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x600Gb SAS, Proxmox
$340.00
DELL PowerEdge R730 Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45
$274.00
Dell PowerEdge R720XD Xeon E5-2680 V2 2.8GHz 20 Cores 256GB RAM 12x4TB
$510.00
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell PowerEdge R730, 2 sinks, SystemBoard, 8 trays,H330,Idrac 8 exp, 2x750w Psu
$135.00
Dell Poweredge R730xd 2.5in 2x E5-2690 v3 2.6ghz 24-Cores 64gb H730 2x 750w
$189.99
DELL PowerEdge R730 16SFF Server 2x E5-2690v4 =28 Cores No RAM/ HDD H730 4xRJ45
$232.97
DELL POWEREDGE T430 SERVER W/ DUAL XEON E5-2609 CPU & 16GB MEMORY
$329.00
Dell R630 8 Port SFF Server 2x E5-2680v4 28C H730P 128GB 2x Trays RJ-45 ENT
$345.00
DELL PowerEdge R630 8SFF Server 2x E5-2690v4 2.6GHz =28 Cores 256GB H730 4xRJ45
$600.00