-
agppart module..
hi..
i use knoppix3.3 ..after booting ..when it stats Starting X11..it gives following error:
Starting X11 [drm:drm_init] *ERROR * Cannot initialize the agppart module
/lib/modules/2.4.24-xfs/kernel/drivers/char/drm/i810.o: init_modules: Cannot allocate memory.
Hint: insmod erroe=rs can be caused by incorrect modules parameters.
You may find more info. In syslog or the output from dmesg.
/lib/modules/2.4.24-xfs/kernel/drivers/char/drm/i810.o: insmod /lib/modules/2.4.24-xfs/kernel/drivers/char/drm/i810.o: failed.
wht is mean by this & why this error occured?
though X server starts after that & everything works fine.
thankx.
-
Senior Member
registered user
I also was getting this error with knoppix 3.3 & with 3.4 using the 2.4 kernel (also i810 vid card). Switching to 3.4 / 2.6 kernel fixed it.
Agpgart has to do with video card acceleration, I could not use graphics-intensive applications like tuxracer until it was working.
-
IIRC I had the same memory problem with Knoppix 3.3 and i810, and solved it by adding a line for more video memory in /etc/X11/XF86config-4 :
Code:
Section "Device"
### Available Driver options are:-
# sw_cursor is needed for some ati and radeon cards
#Option "sw_cursor"
#Option "hw_cursor"
#Option "NoAccel"
#Option "ShowCache"
#Option "ShadowFB"
#Option "UseFBDev"
#Option "Rotate"
Identifier "Card0"
# The following line is auto-generated by KNOPPIX mkxf86config
Driver "i810"
VendorName "All"
BoardName "All"
# BusID "PCI:1:0:0"
VideoRam 16384
EndSection
-
Senior Member
registered user
I have also added video memory but still the agpgart module will not initialize unless I use the 2.6 kernel.
-
Hmm, makes me wish I'd remember what I did to make tuxracer run on 3.3. Wasn't there 3 different i810 display adapters to choose from, but only one worked (after adding memory). Easier to try a newer version of knoppix though.
Similar Threads
-
By madmadmod in forum Customising & Remastering
Replies: 0
Last Post: 01-15-2005, 05:14 PM
-
By Jansi in forum General Support
Replies: 0
Last Post: 08-06-2004, 02:45 PM
-
By MrAhmad in forum Customising & Remastering
Replies: 1
Last Post: 09-06-2003, 11:45 AM
-
By corwinspyre in forum Hardware & Booting
Replies: 1
Last Post: 08-15-2003, 08:38 PM
-
By Myrdhin in forum Customising & Remastering
Replies: 2
Last Post: 08-01-2003, 02:54 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Cisco UCS LSI MegaRAID 9271CV-8I SAS2308 PCIe SAS Internal RAID Controller
$28.00
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99
Intel PCIe SSD AIC RAID Controller Card G97168-252
$44.55
LSI 9305-16i SATA SAS 12Gbs RAID Controller PCIe 3.0 x8 IT-Mode 4* 8643 SATA
$229.99
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$39.95
LSI MegaRaid 9361-8i 12Gbps SAS / SATA Raid Controller PCIe x8 3.0 Tested
$29.00
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$87.99
4 Bay RAID External Hard Drive Enclosure for 2.5/3.5" SATA HDD/SSD
$79.99
G TECHNOLOGY G RAID 0G04228 2-Bay Thunderbolt 2 RAID Array W/Power Supply
$99.99