Have you tried 'knoppix failsafe'? And have you tried booting from both the cd-r & the cd-rw drive?
You could still try the Debian install, Knoppix is probably giving trouble because of a hardware detection problem, not because it's Debian.
Well hereīs a real challenge!!!!!!!!!!!!!!!!!!!!!!!!!!!:
Iīve got a Pcchips 748 LMRT mobo PIII 450Mhz slot 1 (all onboard Puaj!!) with 128 Mb of RAM (8 shared with VGA card), Hd 8 Gb Samsung 5400 RPM, Samsung cd-r, Sony (lite-on) Cd-rw, Intel chipset modem 56K I think itīs a winmodem, cause it needs drivers to work in W$ mill edit.
Iīve tried Knoppix 3.3 first, but i canīt reach even the part when it puts:
Welcome to knoppix live-on-cd!!
Iīve been booting using this lines:
Knoppix vga=normal screen=800x600 mem=120M (my mobo shares 8Mb) noscsi noapm noapic acpi=off
Nothing!!!!!!!!!!!!!!!!!!!!!
Well I thought it was the scsi emulation, so iīve download the 3.6 version in orther to use the 2.6 kernell, and I can only reach the part WELCOME TO....................
The cd is OK it works in EVERY computer exept mine.
I donīt use vga=normal Anymore, cause I can see tux when it starts. I just donīt know what to do.
iīve flashed the bios, read every cheat code, believe me it is very frustrating.
now I use
knoppix26 mem=120M noscsi noapic acpi=off dma (the new bios has dma acceleration enable) noapm lang=es desktop=icewm
ANY SUGEST!!!!!???????????????????
Iīve tried nodma and expert26, but I can reach only the same part i said in the previous post.
I also tried memtest, and there are no errors.
I was thinking in installing a Debbian linux but it fears me cause if a debbian base (Knoppix) doesnīt work, Debbian wonīt work too!
Heres a problem Iīve got for some time, I donīt know if it could be useful, the date an the time goes crazy every time, but I donīt get any advice of battery low in the bios, and the bios config doesnīt get erased.
THANK YOU!!!!
ASK WHAT YOU WANT I WILL REPLY EVERITHING!!!!!!!!!!!!!!
Have you tried 'knoppix failsafe'? And have you tried booting from both the cd-r & the cd-rw drive?
You could still try the Debian install, Knoppix is probably giving trouble because of a hardware detection problem, not because it's Debian.
Thanks crash!!
Iīve tried failsafe, but I could only the same part, Iīve read some things that I want to try, but I can tell it tomorrow, cause the computer is at home and Iīm at work by now!
Thanks anyway and as always say: IT DOESNīT MATTER THE TIME IT WOULD BOOT I KNOW IT !!!!!!!!!!!!!!!!
AXIOMATICO
PS: I know that the problem in Knoppix cames from itīs hardware autodetection, iīve tried it in other computers, and blieve me it really blows up my mind thats why I wanted to install it.
SanDisk 2TB Ultra 3D NAND SSD, Internal Solid State Drive - SDSSDH3-2T00-G26
$149.99
N85XX DELL 3.84TB SAS 12GB/S ENTERPRISE SOLID STATE DRIVE (W/ 14TH GEN CADDY)
$389.95
Western Digital 250GB WD Blue SA510 SATA SSD, Internal M.2 2280 - WDS250G3B0B
$39.99
Western Digital 1TB WD Blue SA510 SATA SSD Internal 2.5â/7mm Cased - WDS100T3B0A
$89.99
Patriot P210 128GB 256GB 512GB 1TB 2TB 2.5" SATA 3 6GB/s Internal SSD PC/MAC Lot
$14.99
Netac 1TB 2TB 512GB Internal SSD 2.5'' SATA III 6Gb/s Solid State Drive lot
$13.99
Micron 2300 256GB M.2 GEN 3x4 PCIe NVMe Solid State Drive 2280 SSD 00C2G4
$14.99
Fanxiang 4TB 2TB 1TB SSD 550MB/s 2.5'' SATA III Internal Solid State Drive lot
$13.99
Lot of 10 Mixed Brand Model 128GB 2.5" SATA SSD Solid State Drives
$69.99
Fanxiang SSD 512GB 1TB 2TB 4TB 2.5'' SSD SATA III Internal Solid State Drive lot
$107.99