Have you tried 'knoppix failsafe'? And have you tried booting from both the cd-r & the cd-rw drive?
You could still try the Debian install, Knoppix is probably giving trouble because of a hardware detection problem, not because it's Debian.
Well hereīs a real challenge!!!!!!!!!!!!!!!!!!!!!!!!!!!:
Iīve got a Pcchips 748 LMRT mobo PIII 450Mhz slot 1 (all onboard Puaj!!) with 128 Mb of RAM (8 shared with VGA card), Hd 8 Gb Samsung 5400 RPM, Samsung cd-r, Sony (lite-on) Cd-rw, Intel chipset modem 56K I think itīs a winmodem, cause it needs drivers to work in W$ mill edit.
Iīve tried Knoppix 3.3 first, but i canīt reach even the part when it puts:
Welcome to knoppix live-on-cd!!
Iīve been booting using this lines:
Knoppix vga=normal screen=800x600 mem=120M (my mobo shares 8Mb) noscsi noapm noapic acpi=off
Nothing!!!!!!!!!!!!!!!!!!!!!
Well I thought it was the scsi emulation, so iīve download the 3.6 version in orther to use the 2.6 kernell, and I can only reach the part WELCOME TO....................
The cd is OK it works in EVERY computer exept mine.
I donīt use vga=normal Anymore, cause I can see tux when it starts. I just donīt know what to do.
iīve flashed the bios, read every cheat code, believe me it is very frustrating.
now I use
knoppix26 mem=120M noscsi noapic acpi=off dma (the new bios has dma acceleration enable) noapm lang=es desktop=icewm
ANY SUGEST!!!!!???????????????????
Iīve tried nodma and expert26, but I can reach only the same part i said in the previous post.
I also tried memtest, and there are no errors.
I was thinking in installing a Debbian linux but it fears me cause if a debbian base (Knoppix) doesnīt work, Debbian wonīt work too!
Heres a problem Iīve got for some time, I donīt know if it could be useful, the date an the time goes crazy every time, but I donīt get any advice of battery low in the bios, and the bios config doesnīt get erased.
THANK YOU!!!!
ASK WHAT YOU WANT I WILL REPLY EVERITHING!!!!!!!!!!!!!!
Have you tried 'knoppix failsafe'? And have you tried booting from both the cd-r & the cd-rw drive?
You could still try the Debian install, Knoppix is probably giving trouble because of a hardware detection problem, not because it's Debian.
Thanks crash!!
Iīve tried failsafe, but I could only the same part, Iīve read some things that I want to try, but I can tell it tomorrow, cause the computer is at home and Iīm at work by now!
Thanks anyway and as always say: IT DOESNīT MATTER THE TIME IT WOULD BOOT I KNOW IT !!!!!!!!!!!!!!!!
AXIOMATICO
PS: I know that the problem in Knoppix cames from itīs hardware autodetection, iīve tried it in other computers, and blieve me it really blows up my mind thats why I wanted to install it.
Lot of 10pcs Brocade 57-1000012-01 8Gbps SWL 850nm SFP+ Optical Transceivers
$19.00
Cisco Meraki MA-SFP-1GB-SX 1000BASE-SX SFP Transceiver Module
$24.99
Cisco GLC-FE-100LX 100BASE-LX SFP Transceiver Module
$15.59
Cisco GLC-FE-100LX-RGD 100BASE-LX SFP Transceiver Module
$17.99
Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03
$8.00
SFP-10G-SR Original Cisco 10GBASE-SR SFP+ V02 Multi mode Transceiver 10-2415-02
$5.00
Brand New Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Module 1310nm 10km SMF LC
$13.89
Lot of 10 - HP 10Gb SR SFP+ Transceiver 455883-B21 455885-001 456096-001 850nm
$23.99
New Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Module 1310nm 10km SMF LC
$14.49
LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module
$89.00