Just boot with knoppix26 cheatcode to see if everything works, if yes, run the installer.
Hello,
I would like to install Knoppix to my hard disk. Since Knoppix 3.6 uses kernel 2.4 by default, I was wondering if it is possible to install Knoppix to my hard disk using kernel 2.6?
Thanks,
Eraser
Just boot with knoppix26 cheatcode to see if everything works, if yes, run the installer.
I wasn't sure the installer would use the running kernel or if it wouldOriginally Posted by Markus
always install using the default 2.4 kernel. Thanks for the tip.
Eraser
Actually, what will happen is that Knoppix will install normally with both kernels but it will append knoppix26 to the lilo append line so it will boot the 2.6 kernel.Originally Posted by eraserman
You could achieve the same result by just installing Knoppix normally then editing lilo.conf to set knoppix26 as the default boot.
Heh, wasn't actually 100% sure, just thought it would make sense to try it out with the wanted kernel before installing.
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
Supermicro 4U 36 Bay Storage Server 2.4Ghz 8-C 128GB 1x1280W Rails TrueNAS ZFS
$712.98
Dell Poweredge R640 Server | 2x Xeon Gold 6132 | 128GB | H730P | 8x HDD Trays
$1849.00
DELL PowerEdge R730XD 24x 2.5" Server Dual 750W Dual Heatsink - BareBones TESTED
$269.99
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
DELL PowerEdge R730 Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45
$274.00
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$79.19
Dell PowerEdge R720XD Xeon E5-2680 V2 2.8GHz 20 Cores 256GB RAM 12x4TB
$510.00
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$297.00
Dell PowerEdge R620 Server 2x E5-2650 V2 = 16 Cores H710P 128GB RAM 2x 600GB SAS
$274.99