They're coming out faster than I can burn them.![]()
But seeing as 2003-03-24 works fine for me, I think I'll just sit tight.
- myconfig=scan bootoption should work now as expected
- Default for "Use entire partition?" in mkpersistenthome is now "NO"
- Fixed two small 'break' errors in autoconfig
- Changed one now Xfree4.3-supported Savage graphics card in pcitable
- Re-added linneighborhood (another SMB browser, now we have 4)
- Default NL keyboard is now en_US in KDE, with option to change to nl_NL
- Fixed wrong dates in CHANGELOG.![]()
They're coming out faster than I can burn them.![]()
But seeing as 2003-03-24 works fine for me, I think I'll just sit tight.
I made myself promise that I would not download anything for at least a week after the 3.2 release. I guess it's paying off.
![]()
I'm amazed at the quick releases and ammount of fixes this week. Klaus kicks some major butt!
That's just great! I just finished burning a CD-RW from the image I downloaded yesterday. I guess I should've checked here first....
BR
Wow... More support for the Super Savage, That is just
totally excellent ! Anyone know if it has a softswitch for
TV-out? If I use the harddware switch built in to my
Toshiba (4280 sat pro) knoppix 3.1 just fails after 10
minutes with xine or mplayer.
I'll download this one tomorrow![]()
L8tr... Tom "Penguin Powered but Zenit adjusted"
KDE wouldnt load![]()
I have had a problem with burning CDs with a Sony Spressa USB burner. X cd toaster does not even run (seems to start then dies) and K3b fails during the task. The 3.2 iso image was burned using 3.1 and X cd toaster on the same system, so it has worked fine. I must say that I have failed to read error logs. Have not tried it on a system with an ATA burner yet. It was unexpected because it all worked so good with 3.1.
Still works better that it was when I had it running on Win98. I was almost ready to scrap the burner, then I ran it on Linux. Have produced as many silver coasters total since turning to Linux as I would produce in one secession under Win98! I use Knoppix to burn CDs on my Win system (required by the company) using my USB burner. It is a little slow (4X), but is burns as fast as our 16X departmental burner on NT. Burned my first iso with the NT setup and since I have not looked back!
Would like to see the USB burner work so I can put 3.2 on my laptop. I like the graphics! I with hard disk install it this weekend and play around with the applications the next little bit.
Overall, I like Knoppix and the selection of applications. It is crowding out other distros for me. I have put it on both desktops and laptops with no problems. It has failed to come up on a system, but I have not tried any of the cheat codes because it is so easy just to try another computer. The computer has a wierd configuration where the on-board AGP is disabled and the "real" video is PCI. Knoppix finds the on-board AGP video and things go downhill from there. Do not blame Knoppix for that one.
I like Debian and Knoppix puts a nice face on it. I have one fast link and will burn new updates as fast as they come out!
The one thing that I would change is to add flexiblity in the partitions. I have to be more clever than I like to be to add /home et cetera. Besides I have to remember to set up my disk. Would like to have /boot without gyrations! It is not a big pain, just a little one. Compared to everything else, I'll adjust.
I installed (yes, like the speed of hdd) 3.2-23-3-2003 version, had difficulty getting apt-get to update or install. Is the source not correct or is the apt-get problem?
When booting the live CD of todays release, persistant home works fine. But, when it finds the save config file it look for a passwd. It needs a 20 character passwd.![]()
Is there a default passwd it needs to boot?![]()
Thanks for the help,
paul![]()
I had the same problem, although I explicitly saved the configuration without a password.Originally Posted by qa1433
Dell PowerEdge C6320 82F9M Server Blade Module 10gb SFP+ 082F9M
$79.99
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00
HP ProLiant BL460c Gen9 Blade 2x E5-2690v4 2.6GHz =28 Cores 32GB P246 650FLB
$223.00
HP ProLiant BL460c Gen9 Blade 2x E5-2690v3 2.6GHz =24 Cores 128GB P246 650FLB
$265.00
Dell PowerEdge M620 Blade Server 2 x Xeon e5 2665 8 x 16 GB(128) RAM - No HD
$44.99
Dell PowerEdge M610 Blade Server E5620@2.2GHZ (6x)8GB RAM (2x)146GB 15K SAS HDD
$79.00
Dell PowerEdge M520 Blade Server Xeon E5-2403 NO HDD NO RAM
$40.00
Dell PowerEdge M620 Blade Server 2x 10C E5-2690v2 64GB Ram 2x 600GB 10k HDD
$125.00
HP ProLiant BL460c Gen9 Blade 2x E5-2697v3 2.6GHz =28 Cores 32GB P246 650FLB
$173.00
DELL PowerEdge M630 Blade 2x E5-2680v4 2.4GHz =28 Cores 128GB H330 2x10Gb X520
$275.00