Hi,
I've got sort of a puzzle here. I've got a project with maybe 6 C source files ( including my own libraries ). The problem is: if I compile them with DJGPP in a win32 environment, I get a fully operational application ( I hard tested it ); but, if I compile it with Knoppix, in the Knoppix Linux environment ( or even with GCC in Linux - a friend of mine did that ), I get a semi functional application - works with some options only and gives an error with others. Now, what can be the problem? In Linux, I don't get any error of compilation when calling the makefile. One other thing: this is version 2.0 alpha of the software; but the size of the binary file is lesser than version 1 - and it should be bigger.
Does anyone has any suggestion?
Regards,
Kepler
LSI 9207-8i 8-Port SAS Non-RAID 6GBPS PCIe Host Bus Adapter
$34.95
Oracle 7085209 LSI MegaRAID SAS 9361-8i 1GB Cache 12Gbps SAS/SATA PCIe RAID Card
$28.20
Cisco UCS LSI MegaRAID 9271CV-8I SAS2308 PCIe SAS Internal RAID Controller
$28.00
LSI 9223-8I 6GBPS PCIe SAS Internal RAID Controller
$22.75
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$39.95
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$82.49
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99
Dell PERC H330 PCIe 3.0 x8 RAID Storage Controller 04Y5H1 High Profile
$17.99