Your modem is a "winmodem" and AOpen does not support linux
I have a 3Com Homeconnect USB Camera on my system. I also have an Aopen FM56-PM controllerless PCI Modem. Knoppix does not detect either. How do I find out if these products are supportable by Knoppix Ver.3.2-2003-03-28-EN ? If they are how do I install them ? As a Newbee
I would also like to find out how I could get a print out of "ispci-v" as mentionned in these forums.
Thanks In Advance,
Nesser
Your modem is a "winmodem" and AOpen does not support linux
As far as your camera goes, try running gtkam. I have no idea if it is supported.
Open a terminal- also known as a shell. At the prompt simply typeOriginally Posted by Nesser
lspci -v
THen with your mouse highlight all of the text that is output to the screen. After you have it highlighted it is already copied to the clipboard, simply paste it as usual.
Nutanix NXS2U2NL12G500 2U Server with 2x X10DRT-P-G5-NI22 Blades USED
$349.99
Dell PowerEdge M620 Blade Server
$39.99
Dell PowerEdge M1000e Chassis w/ 16 x M600 Blade Servers(No Ram, 2 x 147GB HD)
$300.00
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00
Dell PowerEdge M620 Blade Server 2 x Xeon e5 2665 8 x 16 GB(128) RAM - No HD
$44.99
Dell PowerEdge M620 Blade Server/8x8 GB Ram (64GB)/2x Intel Xeon E5-2680 2.70GH
$50.00
Dell PowerEdge FX2S 4 Slot Blade Chassis - CMC, 2x 2400W PSU
$299.00
Dell PowerEdge M630 / HHB Server Module w 2x Intel E5-2680 & Dell P3V42 No HDD
$89.99
Cisco UCS B200 M4 Blade Server 2X E5-2697A V4 18C 2.60GHZ 512GB RAM No HD
$325.00
DELL PowerEdge M630 Blade 2x E5-2620v4 2.1GHz 16 Cores 32GB H330 Choose Drives
$285.00