-
Junior Member
registered user
I have an Spyc@m 100, how do I make it work? I need it. ^_^
This is a question not only for the knoppix but for my non-portable debian 2.0 system installed in my home pc. When I plug the thing it shows in the first TTY (Ctrl-Alt-F1) that the camera is detected and something about listening as /dev/video0 , then I go tho gnomemeeting, I configure it and give it a try, but the camera isn't working. I think that's because of the camera isn't completelly configured or something like that, because all the kernell modules needed are loaded (I hope didn't miss anyone).
Anyone knows how to make it work, so I can *finally* forget about Win2K except for VB programming and some games? (the Riva tnt2 isn't working in accelerated mode, but thats something I want to try and fix myself... ^_^)
-
Senior Member
registered user
It would seem that you have chosen a very challenging endeavor. There doesn't seem to be alot of info about this camera working with Linux but I have posted all I could find. I don't know the first thing about a Trust Spyc@m but it might be interesting to learn. I have seen that some Trust cameras use these drivers:
spca504_flash
stv0680
Which ones have you installed?
Have you tried the USB mass storage driver?
Here are a few links:
http://webcam.sourceforge.net/
http://alpha.dyndns.org/ov511/cameras.html
http://www.teaser.fr/~hfiguiere/linux/digicam.html
I don't know but you may have seen all of this already. Perhaps searching by the chipset and/or vendor & product I.D. would be beneficial.
gluck
-
Junior Member
registered user
I have seen that some Trust cameras use these drivers:
spca504_flash
stv0680
Which ones have you installed?
Have you tried the USB mass storage driver?
As if it where a USB drive?? Then no, I allready tryed even saying "mount -t auto"... and it didn't worked. Maybe I'm overlooking something...
The driver is the stv0680. I managed to get video from the camera (cough 3 fps cough) in quite good color (slightly black&white effect in the debian woody, nearly perfect in the knoppix).
The problem is to get the photos from the camera. I'm not usig it as my main photo camera (my minolta is still best than any digital camera I can afford), but for small detail photos when I don't want to waste a shoot the digital camera it's my first choice.
I **really** want to be able to pick the photos from the camera in Linux. What program should I use? Do I need any other kernel module for it? Any change on /etc needed?
-
Senior Member
registered user
Linux doesn't care what the device actually is- it just sees something that holds alot of data and the mass-storage driver is how it gets it. I mount my digital still camera, copy the files to wherever and then use something like gphoto to view them. This way my camera is only on for a little while- as long as it takes to copy the files. You could go to www.debian.org and have a look at what they have for viewers if you don't like/can't use gphoto.
Similar Threads
-
By ys0304 in forum Networking
Replies: 0
Last Post: 03-06-2005, 02:37 AM
-
By turbine in forum General Support
Replies: 2
Last Post: 09-22-2004, 05:50 AM
-
By fcamisa in forum Hardware & Booting
Replies: 0
Last Post: 06-24-2004, 12:58 PM
-
By WonderAboutLinux in forum Networking
Replies: 5
Last Post: 03-22-2004, 06:42 PM
-
By three eyes open in forum Hdd Install / Debian / Apt
Replies: 6
Last Post: 08-01-2003, 07:29 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
![New Precision DWDM SFP+ 10G 80km Tunable Transceiver 50GHz C-Temp DWDM-SFP10G-C picture](/store/img/g/tqEAAOSwkbxmR-l8/s-l225/New-Precision-DWDM-SFP-10G-80km-Tunable-Transceive.jpg)
New Precision DWDM SFP+ 10G 80km Tunable Transceiver 50GHz C-Temp DWDM-SFP10G-C
$90.00
![LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module picture](/store/img/g/JEEAAOSwzu9ibCFX/s-l225/LOT-OF-20-Genuine-Cisco-SFP-10G-SR-V03-10GBASE-SR-.jpg)
LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module
$95.00
![New Cisco GLC-TE 1G SFP Copper RJ45 100m 1000BASE-T Transceiver Module picture](/store/img/g/UFgAAOSwrw9l1Cbr/s-l225/New-Cisco-GLC-TE-1G-SFP-Copper-RJ45-100m-1000BASE-.jpg)
New Cisco GLC-TE 1G SFP Copper RJ45 100m 1000BASE-T Transceiver Module
$22.32
![For Cisco SFP-10G-T, Ubiquiti UF-RJ45-10G Transceiver, SFP+ to RJ45 10GBase-T picture](/store/img/g/H0kAAOSwYRJhQsEA/s-l225/For-Cisco-SFP-10G-T-Ubiquiti-UF-RJ45-10G-Transceiv.jpg)
For Cisco SFP-10G-T, Ubiquiti UF-RJ45-10G Transceiver, SFP+ to RJ45 10GBase-T
$49.99
![🔥🔥🔥 CISCO SFP-10G-SR V03 10-2415-03 850nm 10GBASE-SR SFP+ Multi Module 🔥🔥🔥 picture](/store/img/g/KTkAAOSwcmBisISE/s-l225/-CISCO-SFP-10G-SR-V03-10-2415-03-850nm-10GBASE-SR-.jpg)
🔥🔥🔥 CISCO SFP-10G-SR V03 10-2415-03 850nm 10GBASE-SR SFP+ Multi Module 🔥🔥🔥
$6.80
![SFP-H10GB-CU3M Cisco 10GB SFP+ Twinax Copper 3M Passive Cable picture](/store/img/g/FssAAOSwsJxl2ME5/s-l225/SFP-H10GB-CU3M-Cisco-10GB-SFP-Twinax-Copper-3M-Pas.jpg)
SFP-H10GB-CU3M Cisco 10GB SFP+ Twinax Copper 3M Passive Cable
$7.99
![GENUINE Cisco SFP-10G-SR V03 SFP+ GBIC Transceiver Module 10-2415-03 picture](/store/img/g/tAkAAOSwdENkHItI/s-l225/GENUINE-Cisco-SFP-10G-SR-V03-SFP-GBIC-Transceiver-.jpg)
GENUINE Cisco SFP-10G-SR V03 SFP+ GBIC Transceiver Module 10-2415-03
$6.80
![Lot of 10 - HP 10Gb SR SFP+ Transceiver 455883-B21 455885-001 456096-001 850nm picture](/store/img/g/NXsAAOSwAktlSXfr/s-l225/Lot-of-10-HP-10Gb-SR-SFP-Transceiver-455883-B21-45.jpg)
Lot of 10 - HP 10Gb SR SFP+ Transceiver 455883-B21 455885-001 456096-001 850nm
$27.99
![New Cisco SFP-10G-LRM 10G SFP+ LRM 1310nm 220m SMF/MMF LC Module picture](/store/img/g/Y-EAAOSw2pVl1CqO/s-l225/New-Cisco-SFP-10G-LRM-10G-SFP-LRM-1310nm-220m-SMF-.jpg)
New Cisco SFP-10G-LRM 10G SFP+ LRM 1310nm 220m SMF/MMF LC Module
$33.24
![LOT OF 10 HPE JD092B X130 10G SFP+ LC SR Transceiver picture](/store/img/g/EMwAAOSwW05l1QTO/s-l225/LOT-OF-10-HPE-JD092B-X130-10G-SFP-LC-SR-Transceive.jpg)
LOT OF 10 HPE JD092B X130 10G SFP+ LC SR Transceiver
$40.00