-
Installing Knoppix on hard drive
Hi,
I am trying knoppix for the first time. I like the way it configured
itself on my machine. This made me want to install it to the hard
drive.
I have an old AMD Duron 800 with SIS 630. When booting from the CD, I
had to specify the xvrefresh=75 and screen=1024x768 for it to come up
properly, otherwise it failed (screen was not visible).
Also because of the shared memory for the video card, I need to
specify the mem= on the boot options as well.
After I got through these problems, the CD-based session worked well.
I currently have a dual boot between Debian Woody and Windows XP. I
want to replace Debian with Knoppix. knx-hdinstall seems to use only
two partitions (swap and root), so the partitioning scheme that I had
created for debian could not be used. I just chose one of the large
partitions for the root filesystem and proceeded.
I think lilo had problems, but I couldn't read any error messages as
the hdinstaller went to the next step immediately.
Upon booting, I still saw the "old" lilo screen from my debian
installation. Needless to say, choosing one of those options failed
miserably.
I rebooted with the knoppix CD and tried to run lilo by hand. I
mounted the filesystem that I had installed as the root filesystem
through "mount -o rw /mnt/hdb6". Then I did "cd /mnt/hdb6; chroot ."
All this seemed to work fine. I could see the /etc/lilo.conf (in
/mnt/hdb6) having the boot device as /dev/hdb. I tried running lilo -
it says "Fatal: cannot open /dev/hdb". I tried changing it to /dev/hda
with the same results.
What can I do to proceed?
Thanks,
Sridhar
-
I rebooted with the knoppix CD and tried to run lilo by hand. I
mounted the filesystem that I had installed as the root filesystem
through "mount -o rw /mnt/hdb6". Then I did "cd /mnt/hdb6; chroot ."
All this seemed to work fine. I could see the /etc/lilo.conf (in
/mnt/hdb6) having the boot device as /dev/hdb. I tried running lilo -
it says "Fatal: cannot open /dev/hdb". I tried changing it to /dev/hda
with the same results.
The problem was that chroot didn't have access to the same mounts that the CD did.
So, here's how I solved this problem:
I changed the boot device to /dev/hda as mentioned above.
Then I moved /boot to /boot.old, ln -s /mnt/hdb6/boot /boot
lilo -C /mnt/hdb6/etc/lilo.conf then works fine.
Note: if you have to add any kernel parameters to the boot, you should edit lilo.conf before running lilo.
Sridhar
-
Senior Member
registered user
Glad you got it working. But actually all you had to do was boot your new install with the boot floppy and run LILO. Oh and BTW - although Knoppix won't install to your original partition scheme it certainly can be made to use it after installation. Simply copy the respective directories to their new partitons, make sure everything points to the new locations and you're set.
Similar Threads
-
By linuxnewbie01 in forum Hdd Install / Debian / Apt
Replies: 1
Last Post: 04-12-2005, 03:55 AM
-
By Bubba in forum General Support
Replies: 3
Last Post: 10-17-2004, 06:19 PM
-
By DimGR in forum Hdd Install / Debian / Apt
Replies: 6
Last Post: 04-30-2004, 06:39 PM
-
By stupidkid in forum Hdd Install / Debian / Apt
Replies: 3
Last Post: 09-28-2003, 06:59 AM
-
By Andy from Somerset in forum Hdd Install / Debian / Apt
Replies: 3
Last Post: 06-23-2003, 07:31 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
SUN Blade X6250 Server 8GB RAM DUAL PROCESSORS 594-4531-01
$109.99
Dell PowerEdge FX2 FX2S Enclosure - 4x PowerEdge FC640 w/ 8x Gold 6132 112C 1TB
$2699.99
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
2 x HP ProLiant BL460c (447707-B21) Blade Servers No RAM No HDD
$30.00
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
Dell PowerEdge M630 Blade Server 1x Xeon E5-2630 v4 CPU / Motherboard P/N 0R10KG
$69.99
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
Dell PowerEdge VRTX Rack Chassis 25-Bay 14.4TB HDD 2x M640 Blade 512GB RAM 2-Bay
$2335.00
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00