There is usually a jumper or pair of solder points to short while powering up the computer to reset BIOS to factory defaults (blank pw). Google your motherboard for the manual if you don't have it and try that.
Sry if this thread doesn't belong here,
dont really know my way around yet.
I know this doesn't have anything to do
with knoppix but I am just hoping someone
will come through with a sol.
I have a problem resetting the Bios password.
The BIOS make for the Machine is:
Phoenix Rom BIOS Plus Version 1.10 AO3
The Computers can boot from Floppy so I ran Knoppix-STD
using a MasterBoot disk, all went well... Fired up cmospwd
so it could recover the passwd, my problem starts here,
when it gives the password it prints out this:
now does this mean I should try out CRC 1st if that doesn'tCode:CRC pwd err
work then try out the other Strings individually or should I put in the
whole thing including the spaces, I tried it all out but it doesn't work.![]()
So i decided I would Kill the BIOS password since the passwd I had wasn't
working.
cmospwd killed the Bios allright but it didn't Delete the passwd.
The problem with this is that the BIOS wont detect any of the Drives on the Machine anymore.![]()
and with this now I cant even boot knoppix-STD because the Machine hasnt detected any of the hardware so I still need the BIOS pwd.
btw I have already tried "phoenix" as the Backdoor pwd.
I hope I have provided enough info on this.
help would be much appreciated on this.
TIA
-xtoor-
There is usually a jumper or pair of solder points to short while powering up the computer to reset BIOS to factory defaults (blank pw). Google your motherboard for the manual if you don't have it and try that.
I recently had to use that jumper method to reset the bios password. It worked great. Did exactly what mmaki suggested - googled the motherboard and found the right points.
thanks mmaki,
I will wait a day or two for other suggestions.
because i am hoping there is another way to get
the pass.
It would really be a pain to disassemble all the cases
in the LAN.
ty anyaway.
-xtoor-
Your bios isn't supported by cmospwd,according to the readme.
It's not suprising that it messed up your bios.
Direct from their readme
Sounds like you might need to do some disassembling.What to do if cmospwd don't work on your PC ?
Try to clear password with cmospwd /k.
If cmospwd /k doesn't work, password is stored in an EEPROM. Try to find a
reset jumper on your motherboard or contact your PC vendor.
Hope your boss/girlfriend/parents aren't too mad.![]()
That was an error code you got,btw.It's in the source of the program.
Good Luck
ORICO 5 Bay Raid Enclosure USB3.0 SATA External Hard Drive Enclosure Up to 80TB
$115.59
ORICO 5 Bay Raid USB3.0 to SATA External Hard Drive Enclosure for 3.5'' HDD LOT
$140.79
Dell EMC 092GD6 Broadcom 9305-16i LSI Quad Port 4 Port SAS RAID Controller
$84.99
OWC Guardian Maximus Raid Enclosure SATA Hard Drive FireWire
$36.99
ASUS Hyper M.2 x16 Gen 4 RAID Card- Used Working
$32.95
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$54.66
WD TB My Book Duo Desktop RAID External Hard Drive 0TB NO DRIVES
$42.00
Dell PERC H330 PCIe 3.0 x8 RAID Storage Controller 4Y5H1 High Profile
$17.99
3.5" Dual HHD RAID Drive Enclosure - Capacity 36tb with "0" RAID- 2.5" w/Adapter
$37.15
CompUSA Internal 2 Bay Removable Rack for 3 SATA Hard Drives Raid Configurations
$25.00