Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: Umm were do I start.

  1. #1
    Junior Member registered user
    Join Date
    Nov 2004
    Posts
    13

    Umm were do I start.

    Ok I was wanting to start tinkering with this a little but well I'm on dialup so looking around takes some time, can someone point me in the right direction on what I need to download I tried the other day but the cd wouldnt boot so ill try agian. I used Binartision burning software I think I'll try nero this time. I'll just start the download go to bed wake up and its done. hehe

  2. #2

  3. #3
    Junior Member registered user
    Join Date
    Nov 2004
    Posts
    13
    Ok I will for sure use nero I have nero 5 that I got with my writer can I use that or do I need 6.
    The main problem Is are there diffrent versions and when I go to the index on the download page do I just choose the 700 megabyte file. Im stupid

  4. #4
    Administrator Site Admin-
    Join Date
    Apr 2003
    Location
    USA
    Posts
    5,441
    Quote Originally Posted by made2000
    Ok I will for sure use nero I have nero 5 that I got with my writer can I use that or do I need 6......
    Nero 5 works fine. Be sure you check the md5 sum of what you download. Read also http://www.knoppix.net/docs/index.php/FaqDownloading and http://www.knoppix.net/docs/index.php/DownloadingHowTo

  5. #5
    Administrator Site Admin-
    Join Date
    Apr 2003
    Location
    USA
    Posts
    5,441
    Also, tell us what the CD will not boot means. Does it get to the first prompt and then hang when you continue, or does it not even try to boot?

  6. #6
    Junior Member registered user
    Join Date
    Nov 2004
    Posts
    13
    Ok sorry not sure what im expecting, when I downloaded the .iso 3.6 I didnt get any other files just that one.

  7. #7
    Junior Member registered user
    Join Date
    Nov 2004
    Posts
    13
    sorry I was posting the same time. No it just went right into windows like normal.

  8. #8
    Administrator Site Admin-
    Join Date
    Apr 2003
    Location
    USA
    Posts
    5,441
    Quote Originally Posted by made2000
    Ok sorry not sure what im expecting, when I downloaded the .iso 3.6 I didnt get any other files just that one.
    Follow instructions in the 2 links I gave. There are files with an md5 checksum that must be checked (particularly if you downloaded from a website, less so if by BitTorrent).

  9. #9
    Junior Member registered user
    Join Date
    Nov 2004
    Posts
    13
    Ok just running this by you I downloaded the version 3.6.iso and also the 3.6 md5 then I ran the md5 checker from toast442.org it took a few minutes then gave me a green light. so as far as that goes I'm good to go right. I already have nero 5 but cant get it till in the morning. I'll follow the steps in the 2 links thanks.

  10. #10
    Administrator Site Admin-
    Join Date
    Apr 2003
    Location
    USA
    Posts
    5,441
    Quote Originally Posted by made2000
    Ok just running this by you I downloaded the version 3.6.iso and also the 3.6 md5 then I ran the md5 checker from toast442.org it took a few minutes then gave me a green light. so as far as that goes I'm good to go right. I already have nero 5 but cant get it till in the morning. I'll follow the steps in the 2 links thanks.
    Yea, a bad download is a common problem, but if your md5 matched then that's not the problem. If you used the "burn image" option in Nero, that's not the problem either (lots of people end up just putting one big iso file on the CD). You could have a bad burn (I always burn at 4x) but I doubt it if booting didn't even try to start. You didn't say anything about your computer. Can it boot from CD, and if it can, is the boot order set in the BIOS to check the CD before the hard drive? And if you have more than one CD/DVD drive, did you try to boot from the primary one? Can you read the CD under Windows? What does it look like? Do you see lots of files on it?

Page 1 of 2 12 LastLast

Similar Threads

  1. X11 Does not start
    By J_T_Biggs in forum General Support
    Replies: 2
    Last Post: 04-13-2004, 07:38 PM
  2. Can't Start X11?
    By fasttech in forum General Support
    Replies: 1
    Last Post: 01-29-2004, 10:02 AM
  3. Wow where should I start?
    By hewittcw in forum General Support
    Replies: 2
    Last Post: 12-16-2003, 08:43 PM
  4. Where do I start??
    By Rhymer in forum General Support
    Replies: 3
    Last Post: 09-11-2003, 10:05 PM
  5. KDE no start
    By timmd in forum General Support
    Replies: 0
    Last Post: 12-18-2002, 12:54 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Cisco Catalyst C9300-24UX-A 24 Port 10G/mGig UPOE Network Switch, no module picture

Cisco Catalyst C9300-24UX-A 24 Port 10G/mGig UPOE Network Switch, no module

$279.97



Cisco Catalyst C9300-24UX-A 24 Port 10G/mGig Copper UPOE Network Switch picture

Cisco Catalyst C9300-24UX-A 24 Port 10G/mGig Copper UPOE Network Switch

$499.00



Cisco WS-C2960X-48FPD-L 48 V07 POE+ GE+2 10G SFP+, LAN BASE 740W w/ C2960X-Stack picture

Cisco WS-C2960X-48FPD-L 48 V07 POE+ GE+2 10G SFP+, LAN BASE 740W w/ C2960X-Stack

$140.00



Cisco Nexus N9K-C93108TC-EX 48-Port 10G RJ-45 6x100G QSFP Network Switch W/Ears picture

Cisco Nexus N9K-C93108TC-EX 48-Port 10G RJ-45 6x100G QSFP Network Switch W/Ears

$499.99



Cisco C3850-NM-2-10G 2 Port Network Exp.Module for 3850 picture

Cisco C3850-NM-2-10G 2 Port Network Exp.Module for 3850

$30.99



Cisco SFP-10G-SR 10-2415-03  10 Gigabit Transceiver   LOT OF 10   @ C picture

Cisco SFP-10G-SR 10-2415-03 10 Gigabit Transceiver LOT OF 10 @ C

$39.99



Cisco C3850-NM-4-10G 4 Port Network Exp.Module for 3850 picture

Cisco C3850-NM-4-10G 4 Port Network Exp.Module for 3850

$124.90



Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03  picture

Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03

$8.00



NEW Cisco C9300-NM-2Y Dual-Port SFP 25G Network Module / NEW -  picture

NEW Cisco C9300-NM-2Y Dual-Port SFP 25G Network Module / NEW -

$544.99



Cisco Catalyst WS-C2960X-24PD-L GigE PoE 370W, 2 x 10G SFP+, LAN Base w/C2960X-S picture

Cisco Catalyst WS-C2960X-24PD-L GigE PoE 370W, 2 x 10G SFP+, LAN Base w/C2960X-S

$114.00