-
HD install different to when running CD ?
I'd got everything running fine on the CD (including sound at last!). I'd used the following cheat codes
Code:
knoppix26 pnpbios=off lang=us wheelmouse
I then installed everything onto the hard drive using
Now when I log in I get an error saying it doesn't recognise /dev/dsp and hence I get no sound. Problem was everything worked fine using the CD. I used to get this problem on the CD if I didn't specify knoppix26 and I found I needed pnpbios=off if I used knoppix26.
Help.
Mike Robinson
-
Senior Member
registered user
Re: HD install different to when running CD ?
Originally Posted by
mike_the_bike
I'd got everything running fine on the CD (including sound at last!). I'd used the following cheat codes
Code:
knoppix26 pnpbios=off lang=us wheelmouse
I then installed everything onto the hard drive using
Now when I log in I get an error saying it doesn't recognise /dev/dsp and hence I get no sound. Problem was everything worked fine using the CD. I used to get this problem on the CD if I didn't specify
knoppix26 and I found I needed
pnpbios=off if I used knoppix26.
Help.
Mike Robinson
Check the file /etc/lilo.conf. There should be a line 'append="ramdisk=xxxx....etc"' . This is the equivalent of booting with these cheatcodes. If your pnpbios=off is not in this list, add it in; then run lilo to implement your changes. You won't have to add the knoppix26, you should have that option on your boot menu.
Both the edit and the run lilo must be done as root.
This may get your sound working, if it doesn't, post again, there are some other setups often needed for sound.
-
First time I've looked at the /etc/lilo.conf file but it seems fine (though none mention knoppix26). It would surprise me if this was wrong as this would imply every hard disk installation would go wrong.
Code:
default="Linux"
image=/boot/vmlinuz
label="Linux"
initrd=/boot/initrd.img
append="ramdisk_size=100000 init=/etc/init lang=us apm=power-off nomce pnpbios=off lang=us wheelmouse"
read-only
image=/boot/vmlinuz-2.4.27
label="Linux(2.4)-1"
initrd=/boot/initrd.img-2.4.27
append="ramdisk_size=100000 init=/etc/init lang=us apm=power-off nomce pnpbios=off lang=us wheelmouse"
read-only
image=/boot/vmlinuz-2.6.7
label="Linux(2.6)-2"
initrd=/boot/initrd.img-2.6.7
append="ramdisk_size=100000 init=/etc/init lang=us apm=power-off nomce pnpbios=off lang=us wheelmouse"
read-only
If I run dmesg then it implies I'm using kernel 2.6.7
Code:
Linux version 2.6.7 (root@Knoppix) (gcc-Version 3.3.4 (Debian 1:3.3.4-3)) #2 SMP Wed Jul 28 04:25:36 CEST 2004
But I get the following types of errors
Code:
Sound server informational message:
Error while initializing the sound driver:
device /dev/dsp can't be opened (No such device)
The sound server will continue, using the null output device.
and
# play /usr/share/sounds/startup.ogg
sox: Can't open output file '/dev/dsp': No such device
and of course no sound !
Mike Robinson
-
I wonder if the problem you are seeing is similar to the problem reported in the following thread:
http://www.knoppix.net/forum/viewtop...446&highlight=
Might be worth a shot...
-
Senior Member
registered user
Try running /etc/init.d/alsa-config. You may have to be root so 'sudo /etc/init.d/alsa-config'.
To add your cheatcode, add to the 'append=' line of the boot entry you are using. (or just add it to all of them).
Here is an excerpt from a previous post concerning no sound; you may have to go though these steps also.
Code:
To get your sounds working, enable sounds in kde control center (which you hav already done), then enable all system notification sounds. Then you have to edit the hidden file /home/(username)/.kde/share/config/knotifyrc & change all three settings to 'yes'. Why kde doesn't do this automatically is a mystery to me since the user is obviously trying to enable system sounds but it doesn't.
Similar Threads
-
Replies: 3
Last Post: 12-09-2005, 05:46 PM
-
By oh_jason in forum Hdd Install / Debian / Apt
Replies: 0
Last Post: 05-23-2005, 10:26 AM
-
By BlueGirl in forum Klik
Replies: 29
Last Post: 01-10-2005, 06:01 PM
-
By Fabianx in forum Ideas
Replies: 45
Last Post: 05-18-2004, 02:10 AM
-
By timothy in forum Hdd Install / Debian / Apt
Replies: 3
Last Post: 10-05-2003, 07:43 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Dell PowerEdge R630 8SFF 2.6Ghz 20-Core 128GB Mem 2x10G+2x1G NIC 2x750W PSU
$399.04
Dell Poweredge R640 Server | 2x Xeon Gold 6132 | 128GB | H730P | 8x HDD Trays
$1849.00
Intel XEON E5-2699 V3 CPU PROCESSOR 18 CORE 2.30GHZ 45MB L3 CACHE 145W SR1XD
$45.00
Intel SR2JT Xeon E5-2683 v4 2.10GHz 16-Core CPU Processor
$21.96
Intel Xeon E5-2680 v4 2.4GHz 35MB 14-Core 120W LGA2011-3 SR2N7
$17.99
Intel Xeon Gold 6140 SR3AX 2.3GHz 18-Core Processor CPU
$39.99
Intel Xeon E5-2699v4 SR2JS 2.2GHz 22-Core 55MB 145W Server Processor CPU
$144.95
HP Workstation Z640 2x Xeon E5-2623V4 32GB Ram Dual 256GB SSD K420 Linux GA
$234.98
Dell Precision Tower 7910 | 2x Intel Xeon E5-2643 V3 | 32GB RAM | No HDD | No OS
$179.95