sounds like your BIOS boot into a MBR which is not what your knoppix installed MBR.
The easiest(if supported) is to change the boot sequence in BIOS.
This message is not coming from GRUB/LILO but more like a standard DOS/NT boot sector.
Am trying to consolidate my setup downstairs, and to move the family from LinSpire to straight Debian via Knoppix.
As part of the consolidation I've moved my external firewire drives onto the downstairs machine (Knoppix supports Software RAID, right?), and then added a second HD to the same IDE cable that my boot disk is on.
Here is where things get wierd. I have made sure the boot disk is setup as Master (correct jumper) and the other disk as Slave (correct jumper). I "think" I've got the cable right with the end connector on the Master, and the middle connector on the Slave.
I can boot off the CD just fine, and see both drives, and read from both ok. I can do the install to the boot drive just fine. But when I reboot I get "Operating System Not Found". However, if I open up the box and disconnect the Slave drive, then Knoppix boots just fine from the boot drive. So obviously the install wrote to the Master drive just fine, but something about the Slave drive stops it from booting properly on the reboot.
Any ideas what I could be doing wrong? I'd like to still have both drives, but opening and closing the box is getting tedious, and once my RAID is setup the other space won't be all that necessary...
Thanks in advance,
Ewan
sounds like your BIOS boot into a MBR which is not what your knoppix installed MBR.
The easiest(if supported) is to change the boot sequence in BIOS.
This message is not coming from GRUB/LILO but more like a standard DOS/NT boot sector.
Well, that didn't seem to work, however setting things up a little differently and using a different hard drive did. I probably should have kept track of which things I did in which order since I suspect that having fixed this contributed to the other hard drive working...
In any event, thanks for the help!
Supermicro 4U 36 Bay Storage Server 2.4Ghz 8-C 128GB 1x1280W Rails TrueNAS ZFS
$712.98
HP ProLiant DL360 G9 Server | 2 x E5-2660V3 2.6Ghz | 64GB | 2 x 900GB SAS HDD
$339.00
Dell Poweredge R640 Server | 2x Xeon Gold 6132 | 128GB | H730P | 8x HDD Trays
$1849.00
Dell PowerEdge R7525 Server 24X2.5(8XNVME)+H745 2xEPYC 7302 CPU 128G RAM 2x2400W
$3350.00
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$89.99
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
HP Proliant DL360 Gen9 28 Core SFF Server 2X E5-2680 V4 16GB RAM P440ar No HDD
$196.95
DELL PowerEdge R730 Server 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$284.00
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$297.00